Hi All:
Introducing myself to the group, my name is Tony McDowell. I'm the Director of the OSPO at Rapid Silicon. I'm ex-Xilinx and was involved in the development of S-DT during my time at Xilinx. Here at Rapid Silicon we're adopting S-DT as the standard interchange format from our FPGA EDA tooling (called Raptor) and our embedded SW development workflows.
I see all of the S-DT collateral (the Lopper tooling and specification). Is all of that up-to-date? I haven't seen much activity on this mailing list in a while and I want to make sure I'm pointing our engineering team at the most up-to-date information.
.tony
Hi Tony,
Yes, most of it should be upstream under the lopper repository:
https://github.com/devicetree-org/lopper https://github.com/devicetree-org/lopper/tree/master/specification
Do let us know if you find any gaps or need more details and we should be able to help.
Cheers,
Stefano
On Fri, 12 Aug 2022, Tony McDowell via System-dt wrote:
Hi All:
Introducing myself to the group, my name is Tony McDowell. I’m the Director of the OSPO at Rapid Silicon. I’m ex-Xilinx and was involved in the development of S-DT during my time at Xilinx. Here at Rapid Silicon we’re adopting S-DT as the standard interchange format from our FPGA EDA tooling (called Raptor) and our embedded SW development workflows.
I see all of the S-DT collateral (the Lopper tooling and specification). Is all of that up-to-date? I haven’t seen much activity on this mailing list in a while and I want to make sure I’m pointing our engineering team at the most up-to-date information.
.tony
Hi Tony!
Thanks for the reminder - I had been procrastinating on cleaning up the notes from the 6/28/22 System DT call before we took a break on calls for the summer. The call notes and recording link can be found on the OpenAMP wiki at https://github.com/OpenAMP/open-amp/wiki/System-Device-Tree-Meeting-Notes-20...
Best regards, Nathalie
-----Original Message----- From: Stefano Stabellini via System-dt system-dt@lists.openampproject.org Sent: Friday, August 12, 2022 1:00 PM To: Tony McDowell anthony.mcdowell@rapidsilicon.com Cc: system-dt@lists.openampproject.org Subject: [System-dt] Re: Adopting S-DT as Standard Interchange Format
Hi Tony,
Yes, most of it should be upstream under the lopper repository:
https://github.com/devicetree-org/lopper https://github.com/devicetree-org/lopper/tree/master/specification
Do let us know if you find any gaps or need more details and we should be able to help.
Cheers,
Stefano
On Fri, 12 Aug 2022, Tony McDowell via System-dt wrote:
Hi All:
Introducing myself to the group, my name is Tony McDowell. I’m the Director of the OSPO at Rapid Silicon. I’m ex-Xilinx and was involved in the development of S-DT during my time at Xilinx. Here at Rapid Silicon we’re adopting S-DT as the standard interchange format from our FPGA EDA tooling (called Raptor) and our embedded SW development workflows.
I see all of the S-DT collateral (the Lopper tooling and specification). Is all of that up-to-date? I haven’t seen much activity on this mailing list in a while and I want to make sure I’m pointing our engineering team at the most up-to-date information.
.tony
-- System-dt mailing list -- system-dt@lists.openampproject.org To unsubscribe send an email to system-dt-leave@lists.openampproject.org
system-dt@lists.openampproject.org
-
Chan King Choy, Nathalie -
Stefano Stabellini -
Tony McDowell