June 2021 - Openamp-rp - lists.openampproject.org

by Ed Mooring

Hi Sam, I don’t see any current work with RTEMS on OpenAMP. There is a porting guide for OpenAMP/libmetal (https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine <https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine>). There is also some support for Micro-blaze bare metal in the existing code base. Regards, Ed M > On Jun 29, 2021, at 11:08 AM, Price, Samuel R. (GSFC-5960) via Openamp-rp <openamp-rp(a)lists.openampproject.org> wrote: > > Has someone put together an RTEMS port they could share? > > > If not is there a good list of steps / tasks needed to get this to work > for RTEMS I could reference? > > Specifically targeting micro-blaze processor. > > > Most likely starting off with Linux Parent, bare metal child. > > Then transitioning to RTEMS parent, bare metal child. > > > Thanks, > > Sam > -- > Openamp-rp mailing list > Openamp-rp(a)lists.openampproject.org > https://lists.openampproject.org/mailman/listinfo/openamp-rp Hi Sam, I don’t see any current work with RTEMS on OpenAMP. There is a porting guide for OpenAMP/libmetal ([1]https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine) . There is also some support for Micro-blaze bare metal in the existing code base. Regards, Ed M On Jun 29, 2021, at 11:08 AM, Price, Samuel R. (GSFC-5960) via Openamp-rp <[2]openamp-rp(a)lists.openampproject.org> wrote: Has someone put together an RTEMS port they could share? If not is there a good list of steps / tasks needed to get this to work for RTEMS I could reference? Specifically targeting micro-blaze processor. Most likely starting off with Linux Parent, bare metal child. Then transitioning to RTEMS parent, bare metal child. Thanks, Sam -- Openamp-rp mailing list [3]Openamp-rp(a)lists.openampproject.org https://lists.openampproject.org/mailman/listinfo/openamp-rp References 1. https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine 2. mailto:openamp-rp@lists.openampproject.org 3. mailto:Openamp-rp@lists.openampproject.org

4 years

1
0
0 0

OpenAmp RTEMS

by Price, Samuel R. (GSFC-5960)

Has someone put together an RTEMS port they could share? If not is there a good list of steps / tasks needed to get this to work for RTEMS I could reference? Specifically targeting micro-blaze processor. Most likely starting off with Linux Parent, bare metal child. Then transitioning to RTEMS parent, bare metal child. Thanks, Sam Has someone put together an RTEMS port they could share? If not is there a good list of steps / tasks needed to get this to work for RTEMS I could reference? Specifically targeting micro-blaze processor. Most likely starting off with Linux Parent, bare metal child. Then transitioning to RTEMS parent, bare metal child. Thanks, Sam

4 years

1
0
0 0

Cancel OpenAMP rp call for July 1

by Bill Mills

All, Both Mathieu and an I are unavailable this Thursday July 1. I am canceling the call this week. Thanks and Sorry, Bill -- Bill Mills Principal Technical Consultant, Linaro +1-240-643-0836 TZ: US Eastern Work Schedule: Tues/Wed/Thur

4 years

1
0
0 0

[OpenAMP/libmetal] e73f0b: zephyr: enable support for Arm AArch32 processors

by Arnaud Pouliquen

Branch: refs/heads/master Home: https://github.com/OpenAMP/libmetal Commit: e73f0b0139bf89710065bbc9f9d050ded6b58408 https://github.com/OpenAMP/libmetal/commit/e73f0b0139bf89710065bbc9f9d050de… Author: Julien Massot <julien.massot(a)iot.bzh> Date: 2021-06-17 (Thu, 17 Jun 2021) Changed paths: M cmake/syscheck.cmake A lib/system/zephyr/arm/CMakeLists.txt A lib/system/zephyr/arm/sys.c A lib/system/zephyr/arm/sys.h R lib/system/zephyr/cortexm/CMakeLists.txt R lib/system/zephyr/cortexm/sys.c R lib/system/zephyr/cortexm/sys.h Log Message: ----------- zephyr: enable support for Arm AArch32 processors Arm AArch32 processors have the same WFI assembly instruction and so can works with the existing cortexm support. Rename cortexm directory to arm. Build tested with stm32mp157c_dk2 for Cortex-M, rcar_h3ulcb for Cortex-R. Signed-off-by: Julien Massot <julien.massot(a)iot.bzh>

4 years

1
0
0 0

Re: [Openamp-rp] Sniffing on OpenAMP/rpmsg Communication

by Bjorn Andersson

On Mon 07 Jun 10:26 CDT 2021, Hannes Tschofenig via Openamp-rp wrote: > Hi all, > I thought I wrote an answer to this earlier, but I can't find it in my Sent folder, so thanks Ed for bumping the thread. > > This might be a stupid question but I try it anyway. > It's certainly not a stupid question! > > I would like to use Wireshark to capture the communication over the > OpenAMP/rpmsg stack from one processor to the other one. > I've had this problem several times, where I am in need to inspecting some data traveling over my rpmsg channels. This has so far resulted in various hacks. In my case this all revolves around the Linux kernel, so looking at prior art usbmon comes to mind. But I've so far fulfilled my needs before reaching a point where my prototypes for something like this could be reused. > Wireshark has been used in used for all sorts of communication > protocols and I believe it is applicable here as well. I could imagine > that someone wrote such a Wireshark plugin already. > Maybe someone of you knows. This could be useful for debugging. > As Ed says, Wireshark doesn't have any knowledge of any of our protocols - but no tool does. So I don't think it's a bad idea to reuse what they have - and usbmon shows up in this context again. Regards, Bjorn

4 years

1
0
0 0

Re: [Openamp-rp] Sniffing on OpenAMP/rpmsg Communication

by Ed Mooring

Hi Hannes, Unfortunately, I don’t believe there is any way to use Wireshark here. Wireshark depends on the underlying protocol stack to provide user-space access to the communication. There are no such hooks in the Linux kernel remoteproc implementation. It does sound like a cool idea though. Regards, Ed M > On Jun 7, 2021, at 8:26 AM, Hannes Tschofenig via Openamp-rp <openamp-rp(a)lists.openampproject.org> wrote: > > Hi all, > > > This might be a stupid question but I try it anyway. > > > I would like to use Wireshark to capture the communication over the > OpenAMP/rpmsg stack from one processor to the other one. > > Wireshark has been used in used for all sorts of communication > protocols and I believe it is applicable here as well. I could imagine > that someone wrote such a Wireshark plugin already. > Maybe someone of you knows. This could be useful for debugging. > > > Ciao > > Hannes > > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy > the information in any medium. Thank you. > -- > Openamp-rp mailing list > Openamp-rp(a)lists.openampproject.org > https://lists.openampproject.org/mailman/listinfo/openamp-rp

4 years

1
0
0 0

[OpenAMP/libmetal] 7e1716: io: add null pointer check in io block ops

by Mark-PK Tsai

Branch: refs/heads/master Home: https://github.com/OpenAMP/libmetal Commit: 7e171668c59c324d031a8f1491a636dc41c2e6a4 https://github.com/OpenAMP/libmetal/commit/7e171668c59c324d031a8f1491a636dc… Author: Mark-PK Tsai <mark-pk.tsai(a)mediatek.com> Date: 2021-06-08 (Tue, 08 Jun 2021) Changed paths: M lib/io.c Log Message: ----------- io: add null pointer check in io block ops metal_io_virt returns NULL on invalid input metal_io_region. Check ptr before use it and remove the offset check which is already tested in metal_io_virt. Signed-off-by: Mark-PK Tsai <mark-pk.tsai(a)mediatek.com>

4 years

1
0
0 0

Sniffing on OpenAMP/rpmsg Communication

by Hannes Tschofenig

Hi all, This might be a stupid question but I try it anyway. I would like to use Wireshark to capture the communication over the OpenAMP/rpmsg stack from one processor to the other one. Wireshark has been used in used for all sorts of communication protocols and I believe it is applicable here as well. I could imagine that someone wrote such a Wireshark plugin already. Maybe someone of you knows. This could be useful for debugging. Ciao Hannes IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. Hi all, This might be a stupid question but I try it anyway. I would like to use Wireshark to capture the communication over the OpenAMP/rpmsg stack from one processor to the other one. Wireshark has been used in used for all sorts of communication protocols and I believe it is applicable here as well. I could imagine that someone wrote such a Wireshark plugin already. Maybe someone of you knows. This could be useful for debugging. Ciao Hannes IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

4 years

1
0
0 0

[OpenAMP/open-amp] f2b3fc: CI: Fix Zephyr build by updating Zephyr SDK version

by Arnaud Pouliquen

Branch: refs/heads/master Home: https://github.com/OpenAMP/open-amp Commit: f2b3fcd2cff2630274aa70811f57251201bc9b41 https://github.com/OpenAMP/open-amp/commit/f2b3fcd2cff2630274aa70811f572512… Author: Arnaud Pouliquen <arnaud.pouliquen(a)foss.st.com> Date: 2021-06-02 (Wed, 02 Jun 2021) Changed paths: M .github/actions/build_ci/entrypoint.sh Log Message: ----------- CI: Fix Zephyr build by updating Zephyr SDK version Update zephyr SDK to 0.12.4 to fix CI compatibility issue. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)foss.st.com>

4 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

Openamp-rp June 2021