HI Mathieu,
Thanks for giving this a try. The log file on pastebin seems to have been truncated. I don't see any error messages. If I had to guess, there is some difference between the GCC installation on Ubuntu 19.10 and the 18.04 I was using. I'm only guessing because of the warning at the top.
This first cut is way too big and complicated. I have some ideas on how to make it smaller and easier to use. I want to write up some requirements/design and send it to this list and the LITE team.
Regards, Ed M
-----Original Message----- From: Mathieu Poirier mathieu.poirier@linaro.org Sent: Monday, January 27, 2020 1:50 PM To: Ed T. Mooring emooring@xilinx.com; Ed T. Mooring emooring@xilinx.com; openamp-rp@lists.openampproject.org Subject: Re: [Openamp-rp] Instructions for Building a Complete OpenAMP Development Environment
Good day Ed,
On Fri, 3 Jan 2020 at 17:59, Ed Mooring via Openamp-rp <openamp- rp@lists.openampproject.org> wrote:
On the December 19 call, I committed to sending the instructions I had provided to the Linaro LITE team to build a bootable image that can be used to develop and test OpenAMP with Linux on Xilinx QEMU.
I am using this setup to work with Paul Sokolovsky on getting CI for OpenAMP on QEMU using LAVA.
This is a first cut. Feedback is welcome.
I finally had time to give this a spin. Just like Bill I hit the "zcu102-zynqmp" problem but fixed it quickly. From there the compilation started and ran for a while until it failed when building QEMU. This is what I got [1] when I launched "bitbake openamp-image-minimal", hopefully one of those SHA will look suspicious to you. I expect a simple misalignment between the various SW repositories fetched by "repo". Speaking of which and echoing Bill's comments, I think an exact git repository and SHA have to be provided for each of the repositories that need to be brought in manually, that is open-amp, libmetal and embeddedsw. At this time I have the following:
open-amp: f98eb2a670ce Maintainers: update Ed Mooring mail address libmetal: e3dfc2fe85e5 Maintainers: update project maintainers embeddedsw: e8db5fb11822 Updated the license.txt file
Let me know if you find something obvious or if you think one of those projects need to be set to a specific version.
Thanks, Mathieu
[1]. https://pastebin.com/V1v25zK0
Regards, Ed M This email and any attachments are intended for the sole use of the named
recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
-- Openamp-rp mailing list Openamp-rp@lists.openampproject.org https://lists.openampproject.org/mailman/listinfo/openamp-rp