Hello,
I am new to this mailing list. I have done some work recently to get the RPMSG sample running on a dual core STM32H device from ST and it works. In this case both Host and Remote runs Zephyr. My goal is to replace the Remote with a bare-metal and did some research and found open-amp can be used for the same. However, I don't see any libmetal port on STM32 under lib/system/generic. My understanding is that with this, I would be able to modify an existing example in open-amp (under https://github.com/OpenAMP/open-amp/tree/main/apps/examples/rpmsg_sample_ech...) to work with the Zephyr rpmsg example at https://github.com/zephyrproject-rtos/zephyr/tree/main/samples/subsys/ipc/rp...)
Has anyone attempted anything like this that I can leverage on? Other than the libmetal port, what else would be needed to get this inter-work with Zephyr RPMSG sample or should I attempt a different sample from Zephyr to work with open-amp sample? Any help to get me in the right direction would be appreciated.
Thanks. Murali Karicheri S&C Electric. ________________________________ NOTICE OF CONFIDENTIALITY: This message may contain information that is considered confidential and which may be prohibited from disclosure under applicable law or by contractual agreement. The information is intended solely for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information contained in or attached to this message is strictly prohibited. If you have received this email transmission in error, please notify the sender by replying to this email and then delete it from your system.