Hi Sam, I don’t see any current work with RTEMS on OpenAMP. There is a porting guide for OpenAMP/libmetal (https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine). There is also some support for Micro-blaze bare metal in the existing code base. Regards, Ed M

On Jun 29, 2021, at 11:08 AM, Price, Samuel R. (GSFC-5960) via Openamp-rp openamp-rp@lists.openampproject.org wrote:

Has someone put together an RTEMS port they could share?

If not is there a good list of steps / tasks needed to get this to work for RTEMS I could reference?

Specifically targeting micro-blaze processor.

Most likely starting off with Linux Parent, bare metal child.

Then transitioning to RTEMS parent, bare metal child.

Thanks,

Sam

Openamp-rp mailing list Openamp-rp@lists.openampproject.org https://lists.openampproject.org/mailman/listinfo/openamp-rp

Hi Sam,

I don’t see any current work with RTEMS on OpenAMP.

There is a porting guide for OpenAMP/libmetal ([1]https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine) . There is also some support for Micro-blaze bare metal in the existing code base.

Regards,

Ed M

On Jun 29, 2021, at 11:08 AM, Price, Samuel R. (GSFC-5960) via Openamp-rp <[2]openamp-rp@lists.openampproject.org> wrote:

Has someone put together an RTEMS port they could share? If not is there a good list of steps / tasks needed to get this to work for RTEMS I could reference? Specifically targeting micro-blaze processor. Most likely starting off with Linux Parent, bare metal child. Then transitioning to RTEMS parent, bare metal child. Thanks, Sam -- Openamp-rp mailing list [3]Openamp-rp@lists.openampproject.org https://lists.openampproject.org/mailman/listinfo/openamp-rp

References

1. https://github.com/OpenAMP/open-amp/wiki/OpenAMP-Porting-GuideLine 2. mailto:openamp-rp@lists.openampproject.org 3. mailto:Openamp-rp@lists.openampproject.org