Hi Bill,

* Bill: Would be good to have Ben give motivation - what he's trying to accomplish by putting this in U-Boot? We have a use-case where RPU firmware would like to use same rpmsg-payloads (protocol) to communicate with both kernel & u-boot.

Is this sufficient information ?

Regards, Arun (from AMD)

From: Chan King Choy, Nathalie via Openamp-system-reference openamp-system-reference@lists.openampproject.org Sent: Thursday, August 18, 2022 3:25 PM To: openamp-system-reference@lists.openampproject.org; arnaud.pouliquen@st.com; Bill Mills bill.mills@linaro.org; Chan King Choy, Nathalie nathalie.chan-king-choy@amd.com; Milea, Danut Gabriel (Danut) Danut.Milea@windriver.com Subject: [OA-syst-ref] 2022-08-17 OpenAMP System Reference notes and action items

Hi all,

Notes from yesterday's call can be found at https://github.com/OpenAMP/openamp-system-reference/wiki/OpenAMP-System-Refe... .

Action items from this call:

* @arnaud.pouliquen@st.commailto:arnaud.pouliquen@st.com: Check if ST has parts w/ hard-wired Ethernet. * @Bill Millsmailto:bill.mills@linaro.org: ask if others in Linaro know more on Zephyr certification project status. * @Chan King Choy, Nathaliemailto:nathalie.chan-king-choy@amd.com: Send email to Board when we should meet again & put social channels on the agenda * @Milea, Danut Gabriel (Danut)mailto:Danut.Milea@windriver.com: The required mods to use UART for R5 are in one of our Zephyr repos. In a DT overlay somewhere. Can check & share.

Best regards, Nathalie