Openamp-system-reference
June 2022
openamp-system-reference@lists.openampproject.org
- 2 participants
- 10 discussions
Calling for agenda: 2022-06-29 OpenAMP System Reference bi-weekly
by Chan King Choy, Nathalie
Hi all,
Calling for agenda items. Here's what I have so far:
* Individual updates
* 7/6 call: Dan will be OOO 7/6 & other US folks might be taking holidays that week due to the long weekend. Options:
* A) Keep it?
* B) Push out the 7/6 call by a week, reconvene on 7/13
* C) Cancel 7/6, reconvene on 7/20
Thanks & regards,
Nathalie
1 year, 10 months
- 1
- 0
Re: [PATCH v8 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver
by Tanmay Shah
Hi Mathieu,
I agree to all of the comments. I will address them in next revision.
Please find my response below for some comments:
Thanks,
Tanmay
On 6/8/22 10:37 AM, Mathieu Poirier wrote:
> On Thu, Jun 02, 2022 at 01:38:34PM -0700, Tanmay Shah wrote:
>> This driver enables r5f dual core Real time Processing Unit subsystem
>> available on Xilinx Zynq Ultrascale MPSoC Platform. RPU subsystem
>> (cluster) can be configured in different modes e.g. split mode in which
>> two r5f cores work independent of each other and lock-step mode in which
>> both r5f cores execute same code clock-for-clock and notify if the
>> result is different.
>>
>> The Xilinx r5 Remoteproc Driver boots the RPU cores via calls to the Xilinx
>> Platform Management Unit that handles the R5 configuration, memory access
>> and R5 lifecycle management. The interface to this manager is done in this
>> driver via zynqmp_pm_* function calls.
>>
>> Signed-off-by: Ben Levinsky <ben.levinsky(a)xilinx.com>
>> Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
>> ---
>>
>> Changes in v8:
>> - None
>>
>> Changes in v7:
>> - None
>>
>> Changes in v6:
>> - None
>>
>> Changes in v5:
>> - None
>>
>> Changes in v4:
>> - Remove redundant header files
>> - use dev_err_probe() to report errors during probe
>> - Fix missing check on error code returned by zynqmp_r5_add_rproc_core()
>> - Fix memory leaks all over the driver when resource allocation fails for any core
>> - make cluster mode check only at one place
>> - remove redundant initialization of variable
>> - remove redundant use of of_node_put()
>> - Fix Comment format problem
>> - Assign offset of zynqmp_tcm_banks instead of duplicating it
>> - Add tcm and memory regions rproc carveouts during prepare instead of parse_fw
>> - Remove rproc_mem_entry object from r5_core
>> - Use put_device() and rproc_del() APIs to fix memory leaks
>> - Replace pr_* with dev_*. This was missed in v3, fix now.
>> - Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was suggested by checkpatch script.
>>
>> Changes in v3:
>> - Fix checkpatch script indentation warning
>> - Remove unused variable from xilinx remoteproc driver
>> - use C style comments, i.e /*...*/
>> - Remove redundant debug information which can be derived using /proc/device-tree
>> - Fix multilined comment format
>> - s/"final fot TCM"/"final for TCM"
>> - Function devm_kzalloc() does not return an code on error, just NULL.
>> Remove redundant error check for this function throughout the driver.
>> - Fix RPU mode configuration and add documentation accordingly
>> - Get rid of the indentations to match function documentation style with rest of the driver
>> - Fix memory leak by only using r5_rproc->priv and not replace it with new instance
>> - Use 'i' for the outer loop and 'j' for the inner one as per convention
>> - Remove redundant error and NULL checks throughout the driver
>> - Use devm_kcalloc() when more than one element is required
>> - Add memory-regions carveouts during driver probe instead of parse_fw call
>> This removes redundant copy of reserved_mem object in r5_core structure.
>> - Fix memory leak by using of_node_put()
>> - Fix indentation of tcm_mem_map function args
>> - Remove redundant init of variables
>> - Initialize tcm bank size variable for lockstep mode
>> - Replace u32 with phys_addr_t for variable stroing memory bank address
>> - Add documentation of TCM behavior in lockstep mode
>> - Use dev_get_drvdata instead of platform driver API
>> - Remove info level messages
>> - Fix checkpatch.pl warnings
>> - Add documentation for the Xilinx r5f platform to understand driver design
>> drivers/remoteproc/Kconfig | 12 +
>> drivers/remoteproc/Makefile | 1 +
>> drivers/remoteproc/xlnx_r5_remoteproc.c | 1045 +++++++++++++++++++++++
>> 3 files changed, 1058 insertions(+)
>> create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c
>>
>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>> index 166019786653..5637a71c0677 100644
>> --- a/drivers/remoteproc/Kconfig
>> +++ b/drivers/remoteproc/Kconfig
>> @@ -352,6 +352,18 @@ config TI_K3_R5_REMOTEPROC
>> It's safe to say N here if you're not interested in utilizing
>> a slave processor.
>>
>> +config XLNX_R5_REMOTEPROC
>> + tristate "Xilinx R5 remoteproc support"
>> + depends on PM && ARCH_ZYNQMP
>> + depends on ZYNQMP_FIRMWARE
>> + select RPMSG_VIRTIO
>> + select ZYNQMP_IPI_MBOX
>> + help
>> + Say y or m here to support Xilinx R5 remote processors via the remote
>> + processor framework.
>> +
>> + It's safe to say N if not interested in using RPU r5f cores.
>> +
>> endif # REMOTEPROC
>>
>> endmenu
>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>> index 5478c7cb9e07..91314a9b43ce 100644
>> --- a/drivers/remoteproc/Makefile
>> +++ b/drivers/remoteproc/Makefile
>> @@ -38,3 +38,4 @@ obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
>> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
>> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
>> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
>> +obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
>> diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
>> new file mode 100644
>> index 000000000000..394b3469463c
>> --- /dev/null
>> +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
>> @@ -0,0 +1,1045 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * ZynqMP R5 Remote Processor driver
>> + *
>> + */
>> +
>> +#include <dt-bindings/power/xlnx-zynqmp-power.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/firmware/xlnx-zynqmp.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc.h>
>> +#include <linux/slab.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +/* settings for RPU cluster mode */
>> +enum zynqmp_r5_cluster_mode {
>> + SPLIT_MODE = 0, /* When cores run as separate processor */
>> + LOCKSTEP_MODE = 1, /* cores execute same code in lockstep,clk-for-clk */
>> + SINGLE_CPU_MODE = 2, /* core0 is held in reset and only core1 runs */
>> +};
>> +
>> +/**
>> + * struct mem_bank_data - Memory Bank description
>> + *
>> + * @addr: Start address of memory bank
>> + * @size: Size of Memory bank
>> + * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off
>> + * @bank_name: name of the bank for remoteproc framework
>> + */
>> +struct mem_bank_data {
>> + phys_addr_t addr;
>> + size_t size;
>> + u32 pm_domain_id;
>> + char *bank_name;
>> +};
>> +
>> +static const struct mem_bank_data zynqmp_tcm_banks[] = {
>> + {0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
>> + {0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
>> + {0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
>> + {0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
>> +};
>> +
>> +/**
>> + * struct zynqmp_r5_core - ZynqMP R5 core structure
>> + *
>> + * @dev: device of RPU instance
>> + * @np: device node of RPU instance
>> + * @tcm_bank_count: number TCM banks accessible to this RPU
>> + * @tcm_banks: array of each TCM bank data
>> + * @rmem_count: Number of reserved mem regions
>> + * @rmem: reserved memory region nodes from device tree
>> + * @rproc: rproc handle
>> + * @pm_domain_id: RPU CPU power domain id
>> + */
>> +struct zynqmp_r5_core {
>> + struct device *dev;
>> + struct device_node *np;
>> + int tcm_bank_count;
>> + struct mem_bank_data **tcm_banks;
>> + int rmem_count;
>> + struct reserved_mem **rmem;
>> + struct rproc *rproc;
>> + u32 pm_domain_id;
>> +};
>> +
>> +/**
>> + * struct zynqmp_r5_cluster - ZynqMP R5 cluster structure
>> + *
>> + * @dev: r5f subsystem cluster device node
>> + * @mode: cluster mode of type zynqmp_r5_cluster_mode
>> + * @core_count: number of r5 cores used for this cluster mode
>> + * @r5_cores: Array of pointers pointing to r5 core
>> + */
>> +struct zynqmp_r5_cluster {
>> + struct device *dev;
>> + enum zynqmp_r5_cluster_mode mode;
>> + int core_count;
>> + struct zynqmp_r5_core **r5_cores;
>> +};
>> +
>> +/*
>> + * zynqmp_r5_set_mode - set RPU operation mode
>> + *
>> + * set RPU operation mode
>> + *
>> + * Return: 0 for success, negative value for failure
>> + */
>> +static int zynqmp_r5_set_mode(struct zynqmp_r5_core *r5_core,
>> + enum rpu_oper_mode fw_reg_val,
>> + enum rpu_tcm_comb tcm_mode)
>> +{
>> + int ret;
>> +
>> + ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val);
>> + if (ret < 0) {
>> + dev_err(r5_core->dev, "failed to set RPU mode\n");
>> + return ret;
>> + }
>> +
>> + ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id, tcm_mode);
>> + if (ret < 0)
>> + dev_err(r5_core->dev, "failed to configure TCM\n");
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_start
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Start R5 Core from designated boot address.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_rproc_start(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core = rproc->priv;
>> + enum rpu_boot_mem bootmem;
>> + int ret;
>> +
>> + /*
>> + * The exception vector pointers (EVP) refer to the base-address of
>> + * exception vectors (for reset, IRQ, FIQ, etc). The reset-vector
>> + * starts at the base-address and subsequent vectors are on 4-byte
>> + * boundaries.
>> + *
>> + * Exception vectors can start either from 0x0000_0000 (LOVEC) or
>> + * from 0xFFFF_0000 (HIVEC) which is mapped in the OCM (On-Chip Memory)
>> + *
>> + * Usually firmware will put Exception vectors at LOVEC.
>> + *
>> + * It is not recommend that you change the exception vector.
>> + * Changing the EVP to HIVEC will result in increased interrupt latency
>> + * and jitter. Also, if the OCM is secured and the Cortex-R5F processor
>> + * is non-secured, then the Cortex-R5F processor cannot access the
>> + * HIVEC exception vectors in the OCM.
>> + */
>> + bootmem = (rproc->bootaddr >= 0xFFFC0000) ?
>> + PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC;
>> +
>> + dev_dbg(r5_core->dev, "RPU boot addr 0x%llx from %s.", rproc->bootaddr,
>> + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM");
>> +
>> + ret = zynqmp_pm_request_wake(r5_core->pm_domain_id, 1,
>> + bootmem, ZYNQMP_PM_REQUEST_ACK_NO);
>> + if (ret)
>> + dev_err(r5_core->dev,
>> + "failed to start RPU = 0x%x\n", r5_core->pm_domain_id);
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_stop
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Power down R5 Core.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_rproc_stop(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core = rproc->priv;
>> + int ret;
>> +
>> + ret = zynqmp_pm_force_pwrdwn(r5_core->pm_domain_id,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret)
>> + dev_err(r5_core->dev, "failed to stop remoteproc RPU %d\n", ret);
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_mem_region_map
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to map
>> + *
>> + * Callback to map va for memory-region's carveout.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_mem_region_map(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + void __iomem *va;
>> +
>> + va = ioremap_wc(mem->dma, mem->len);
>> + if (IS_ERR_OR_NULL(va))
>> + return -ENOMEM;
>> +
>> + mem->va = (void *)va;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_mem_unmap
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to unmap
>> + *
>> + * Unmap memory-region carveout
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_mem_region_unmap(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + iounmap((void __iomem *)mem->va);
>> + return 0;
>> +}
>> +
>> +/*
>> + * add_mem_regions
>> + * @r5_core: single R5 core's corresponding zynqmp_r5_core type instance
>> + * @rmem: reserved mem region parsed from dt node
>> + *
>> + * Construct rproc mem carveouts from carveout provided in
>> + * memory-region property
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int add_mem_regions_carveout(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core;
>> + struct reserved_mem *rmem;
>> + struct rproc_mem_entry **rproc_mem;
>> + int i, num_mem_regions;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + num_mem_regions = r5_core->rmem_count;
>> +
>> + /* memory regions not defined */
>> + if (num_mem_regions < 1)
>> + return 0;
> This can't happen as per zynqmp_r5_get_mem_region_node().
That's right. I will fix this in zynqmp_r5_get_mem_region_node().
As memory-region is not required property, we return successfully if
memory regions are not defined.
So, zynqmp_r5_get_mem_region_node() should not fail if memory-region
property is not found.
>
>> +
>> + rproc_mem = kcalloc(num_mem_regions,
>> + sizeof(struct rproc_mem_entry *), GFP_KERNEL);
>> + if (!rproc_mem)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < num_mem_regions; i++) {
>> + rmem = r5_core->rmem[i];
>> +
>> + /* Register associated reserved memory regions */
>> + rproc_mem[i] = rproc_mem_entry_init(&rproc->dev, NULL,
>> + (dma_addr_t)rmem->base,
>> + rmem->size, rmem->base,
>> + zynqmp_r5_mem_region_map,
>> + zynqmp_r5_mem_region_unmap,
>> + rmem->name);
> Any reason you need to call rproc_mem_entry_init() on the vdev0buffers?
Thanks for this pointer.
Actually this is remoteproc driver only and I was only considering to
add only fw-image memory-region.
But, as this is generic function for all the memory regions, I think I
should handle other regions as well.
I believe there is no code change needed to add virngs.
However, for vdev*buffers I will use "rproc_of_resm_mem_entry_init()".
>> + if (!rproc_mem[i])
>> + goto release_mem_regions;
>> +
>> + dev_dbg(&rproc->dev, "reserved mem carveout %s addr=%llx, size=0x%llx",
>> + rmem->name, rmem->base, rmem->size);
>> + }
>> +
>> + /*
>> + * Add carveouts only if all rproc mem enties are
>> + * successfully initialized
>> + */
>> + for (i = 0; i < num_mem_regions; i++)
>> + rproc_add_carveout(rproc, rproc_mem[i]);
>> +
>> + kfree(rproc_mem);
>> + return 0;
>> +
>> +release_mem_regions:
>> + for (i--; i > -1; i--)
>> + kfree(rproc_mem[i]);
>> + kfree(rproc_mem);
>> + return -ENOMEM;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_mem_unmap
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to unmap
>> + *
>> + * Unmap TCM banks when powering down R5 core.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int tcm_mem_unmap(struct rproc *rproc, struct rproc_mem_entry *mem)
>> +{
>> + iounmap((void __iomem *)mem->va);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * tcm_mem_map
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to initialize the va and da fields of
>> + *
>> + * Given TCM bank entry, this callback will set device address for R5
>> + * running on TCM and also setup virtual address for TCM bank
>> + * remoteproc carveout.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int tcm_mem_map(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + void __iomem *va;
>> +
>> + va = ioremap_wc(mem->dma, mem->len);
>> + if (IS_ERR_OR_NULL(va))
>> + return -ENOMEM;
>> +
>> + /* Update memory entry va */
>> + mem->va = (void *)va;
>> +
>> + /* clear TCMs */
>> + memset_io(va, 0, mem->len);
>> +
>> + /*
>> + * The R5s expect their TCM banks to be at address 0x0 and 0x2000,
>> + * while on the Linux side they are at 0xffexxxxx.
>> + *
>> + * Zero out the high 12 bits of the address. This will give
>> + * expected values for TCM Banks 0A and 0B (0x0 and 0x20000).
>> + */
>> + mem->da &= 0x000fffff;
>> +
>> + /*
>> + * TCM Banks 1A and 1B still have to be translated.
>> + *
>> + * Below handle these two banks' absolute addresses (0xffe90000 and
>> + * 0xffeb0000) and convert to the expected relative addresses
>> + * (0x0 and 0x20000).
>> + */
>> + if (mem->da == 0x90000 || mem->da == 0xB0000)
>> + mem->da -= 0x90000;
>> +
>> + /* if translated TCM bank address is not valid report error */
>> + if (mem->da != 0x0 && mem->da != 0x20000) {
>> + dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da);
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static int add_tcm_carveout_split_mode(struct rproc *rproc)
>> +{
>> + int i, num_banks, ret;
>> + struct rproc_mem_entry **rproc_mem;
>> + u32 pm_domain_id;
>> + phys_addr_t bank_addr;
>> + size_t bank_size;
>> + char *bank_name;
>> + struct device *dev;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> +
>> + dev = r5_core->dev;
>> +
>> + /* go through zynqmp banks for r5 node */
>> + num_banks = r5_core->tcm_bank_count;
>> + if (num_banks <= 0) {
>> + dev_err(dev, "need to specify TCM banks\n");
>> + return -EINVAL;
>> + }
> This check should be done in zynqmp_r5_get_tcm_node(), please remove. Same
> comment for add_tcm_carveout_lockstep_mode().
>
>> +
>> + rproc_mem = kcalloc(num_banks,
>> + sizeof(struct rproc_mem_entry *), GFP_KERNEL);
>> + if (!rproc_mem)
>> + return -ENOMEM;
>> +
>> + /*
>> + * Power-on Each 64KB TCM,
>> + * register its address space, map and unmap functions
>> + * and add carveouts accordingly
>> + */
>> + for (i = 0; i < num_banks; i++) {
>> + bank_addr = r5_core->tcm_banks[i]->addr;
>> + bank_name = r5_core->tcm_banks[i]->bank_name;
>> + bank_size = r5_core->tcm_banks[i]->size;
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> +
>> + ret = zynqmp_pm_request_node(pm_domain_id,
>> + ZYNQMP_PM_CAPABILITY_ACCESS, 0,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
>> + goto release_tcm_split;
>> + }
>> +
>> + dev_dbg(dev, "TCM carveout split mode %s addr=%llx, size=0x%lx",
>> + bank_name, bank_addr, bank_size);
>> +
>> + rproc_mem[i] = rproc_mem_entry_init(dev, NULL, bank_addr,
>> + bank_size, bank_addr,
>> + tcm_mem_map, tcm_mem_unmap,
>> + bank_name);
>> + if (!rproc_mem[i]) {
>> + ret = -ENOMEM;
>> + goto release_tcm_split;
> If we end up here function zynqmp_pm_release_node() would not be called for the
> bank that was powered just above.
>
>> + }
>> + }
>> +
>> + /*
>> + * Add carveouts only if all rproc mem enties are
>> + * successfully initialized
>> + */
>> + for (i = 0; i < num_banks; i++)
>> + rproc_add_carveout(rproc, rproc_mem[i]);
>> +
>> + kfree(rproc_mem);
>> + return 0;
>> +
>> +release_tcm_split:
>> + /* If failed, Turn off all TCM banks turned on before */
>> + for (i--; i > -1; i--) {
> I have already commented on this, please apply throughout.
>
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + zynqmp_pm_release_node(pm_domain_id);
>> + kfree(rproc_mem[i]);
>> + }
>> + kfree(rproc_mem);
>> + return ret;
>> +}
>> +
>> +static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
>> +{
>> + int i, num_banks, ret;
>> + struct rproc_mem_entry *rproc_mem;
>> + u32 pm_domain_id;
>> + phys_addr_t bank_addr;
>> + size_t bank_size = 0;
>> + char *bank_name;
>> + struct device *dev;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + dev = r5_core->dev;
>> +
>> + /* Go through zynqmp banks for r5 node */
>> + num_banks = r5_core->tcm_bank_count;
>> + if (num_banks <= 0) {
>> + dev_err(dev, "need to specify TCM banks\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * In lockstep mode, TCM is contiguous memory block
>> + * However, each TCM block still needs to be enabled individually.
>> + * So, Enable each TCM block individually, but add their size
>> + * to create contiguous memory region.
>> + */
>> + bank_addr = r5_core->tcm_banks[0]->addr;
>> + bank_name = r5_core->tcm_banks[0]->bank_name;
>> +
>> + for (i = 0; i < num_banks; i++) {
>> + bank_size += r5_core->tcm_banks[i]->size;
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> +
>> + /* Turn on each TCM bank individually */
>> + ret = zynqmp_pm_request_node(pm_domain_id,
>> + ZYNQMP_PM_CAPABILITY_ACCESS, 0,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
>> + goto release_tcm_lockstep;
>> + }
>> + }
>> +
>> + dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%llx, size=0x%lx",
>> + bank_name, bank_addr, bank_size);
>> +
>> + /* Register TCM address range, TCM map and unmap functions */
>> + rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
>> + bank_size, bank_addr,
>> + tcm_mem_map, tcm_mem_unmap,
>> + bank_name);
>> + if (!rproc_mem) {
>> + ret = -ENOMEM;
>> + goto release_tcm_lockstep;
>> + }
>> +
>> + /* If registration is success, add carveouts */
>> + rproc_add_carveout(rproc, rproc_mem);
>> +
>> + return 0;
>> +
>> +release_tcm_lockstep:
>> + /* If failed, Turn off all TCM banks turned on before */
>> + for (i--; i > -1; i--) {
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + zynqmp_pm_release_node(pm_domain_id);
>> + }
>> + return ret;
>> +}
>> +
>> +/*
>> + * add_tcm_banks()
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Given R5 node in remoteproc instance
>> + * allocate remoteproc carveout for TCM memory
>> + * needed for firmware to be loaded
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int add_tcm_banks(struct rproc *rproc)
>> +{
>> + struct device *dev;
>> + struct zynqmp_r5_cluster *cluster;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + if (!r5_core)
>> + return -EINVAL;
>> +
>> + dev = r5_core->dev;
>> +
>> + cluster = dev_get_drvdata(dev->parent);
>> + if (!cluster) {
>> + dev_err(dev->parent, "Invalid driver data\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * In lockstep mode TCM banks are one contiguous memory region of 256Kb
>> + * In split mode, each TCM bank is 64Kb and not contiguous.
>> + * We add memory carveouts accordingly.
>> + */
>> + if (cluster->mode == SPLIT_MODE)
>> + return add_tcm_carveout_split_mode(rproc);
>> + else if (cluster->mode == LOCKSTEP_MODE)
>> + return add_tcm_carveout_lockstep_mode(rproc);
>> +
>> + dev_err(cluster->dev, "invalid cluster mode\n");
>> + return -EINVAL;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_parse_fw()
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @fw: ptr to firmware to be loaded onto r5 core
>> + *
>> + * When loading firmware, ensure the necessary carveouts are in remoteproc
> There are no checks done to that effect in the function...
Thanks. This documentation is old. I will remove above line and fix
description.
>
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
>> +{
>> + int ret;
>> +
>> + ret = rproc_elf_load_rsc_table(rproc, fw);
>> + if (ret == -EINVAL) {
>> + /*
>> + * resource table only required for IPC.
>> + * if not present, this is not necessarily an error;
>> + * for example, loading r5 hello world application
>> + * so simply inform user and keep going.
>> + */
>> + dev_info(&rproc->dev, "no resource table found.\n");
>> + ret = 0;
>> + }
>> + return ret;
>> +}
>> +
>> +static int zynqmp_r5_rproc_prepare(struct rproc *rproc)
>> +{
>> + int ret = 0;
>> +
>> + ret = add_tcm_banks(rproc);
>> + if (ret) {
>> + dev_err(&rproc->dev, "failed to get TCM banks, err %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = add_mem_regions_carveout(rproc);
>> + if (ret)
>> + dev_warn(&rproc->dev, "failed to get reserve mem regions %d\n",
>> + ret);
>> +
>> + return 0;
>> +}
>> +
>> +static int zynqmp_r5_rproc_unprepare(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core;
>> + int i;
>> + u32 pm_domain_id;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> +
>> + for (i = 0; i < r5_core->tcm_bank_count; i++) {
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + if (zynqmp_pm_release_node(pm_domain_id))
>> + dev_warn(r5_core->dev,
>> + "can't turn off TCM bank 0x%x", pm_domain_id);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct rproc_ops zynqmp_r5_rproc_ops = {
>> + .prepare = zynqmp_r5_rproc_prepare,
>> + .unprepare = zynqmp_r5_rproc_unprepare,
>> + .start = zynqmp_r5_rproc_start,
>> + .stop = zynqmp_r5_rproc_stop,
>> + .load = rproc_elf_load_segments,
>> + .parse_fw = zynqmp_r5_parse_fw,
>> + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>> + .sanity_check = rproc_elf_sanity_check,
>> + .get_boot_addr = rproc_elf_get_boot_addr,
>> +};
>> +
>> +/**
>> + * zynqmp_r5_add_rproc_core()
>> + * Probes ZynqMP R5 processor device node
>> + * this is called for each individual R5 core
>> + *
>> + * @cdev: Device node of each r5 core
>> + *
>> + * Return: zynqmp_r5_core object for success, error pointer in case of error.
>> + */
>> +static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
>> +{
>> + int ret;
>> + struct rproc *r5_rproc;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + /* Set up DMA mask */
>> + ret = dma_set_coherent_mask(cdev, DMA_BIT_MASK(32));
>> + if (ret)
>> + return ERR_PTR(ret);
>> +
>> + /* Allocate remoteproc instance */
>> + r5_rproc = devm_rproc_alloc(cdev, dev_name(cdev),
>> + &zynqmp_r5_rproc_ops,
>> + NULL, sizeof(struct zynqmp_r5_core));
>> + if (!r5_rproc) {
>> + dev_err(cdev, "failed to allocate memory for rproc instance\n");
>> + return ERR_PTR(-ENOMEM);
>> + }
>> +
>> + r5_rproc->auto_boot = false;
>> + r5_core = (struct zynqmp_r5_core *)r5_rproc->priv;
>> + r5_core->dev = cdev;
>> + r5_core->np = dev_of_node(cdev);
>> + if (!r5_core->np) {
>> + dev_err(cdev, "can't get device node for r5 core\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + /* Add R5 remoteproc core */
>> + ret = rproc_add(r5_rproc);
>> + if (ret) {
>> + dev_err(cdev, "failed to add r5 remoteproc\n");
>> + return ERR_PTR(ret);
>> + }
>> +
>> + r5_core->rproc = r5_rproc;
>> + return r5_core;
>> +}
>> +
>> +/**
>> + * zynqmp_r5_get_tcm_node()
>> + * Ideally this function should parse tcm node and store information
>> + * in r5_core instance. We will use hardcoded TCM information from
>> + * driver for now in this function.
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_get_tcm_node(struct zynqmp_r5_cluster *cluster)
>> +{
>> + int tcm_bank_count, tcm_node;
>> + int i, j;
>> + struct zynqmp_r5_core *r5_core;
>> + struct device *dev = cluster->dev;
>> +
>> + /*
>> + * ToDo: Use predefined TCM address space values from driver until
>> + * system-dt spec is not final for TCM
>> + */
>> + tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks);
>> +
>> + /* count per core tcm banks */
>> + tcm_bank_count = tcm_bank_count / cluster->core_count;
>> +
>> + /*
>> + * r5 core 0 will use all of TCM banks in lockstep mode.
>> + * In split mode, r5 core0 will use 128k and r5 core1 will use another
>> + * 128k. Assign TCM banks to each core accordingly
>> + */
>> + tcm_node = 0;
>> + for (i = 0; i < cluster->core_count; i++) {
>> + r5_core = cluster->r5_cores[i];
>> + r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
>> + sizeof(struct mem_bank_data *),
>> + GFP_KERNEL);
>> + if (!r5_core->tcm_banks)
>> + return -ENOMEM;
>> +
>> + for (j = 0; j < tcm_bank_count; j++) {
>> + /*
>> + * Use pre-defined TCM reg values.
>> + * Eventually this should be replaced by values
>> + * parsed from dts.
>> + */
>> + r5_core->tcm_banks[j] =
>> + (struct mem_bank_data *)&zynqmp_tcm_banks[tcm_node];
>> + tcm_node++;
>> + }
>> +
>> + r5_core->tcm_bank_count = tcm_bank_count;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/**
>> + * zynqmp_r5_get_mem_region_node()
>> + * parse memory-region property from dt node and add
>> + * memory region carveouts
>> + *
>> + * @r5_core: pointer to zynqmp_r5_core type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_get_mem_region_node(struct zynqmp_r5_core *r5_core)
>> +{
>> + int res_mem_count, i;
>> + struct device *dev;
>> + struct device_node *np, *rmem_np;
>> + struct reserved_mem **rmem;
>> +
>> + dev = r5_core->dev;
>> +
>> + np = r5_core->np;
>> +
>> + res_mem_count = of_property_count_elems_of_size(np, "memory-region",
>> + sizeof(phandle));
>> + if (res_mem_count <= 0) {
>> + dev_warn(dev, "failed to get memory-region property %d\n",
>> + res_mem_count);
>> + return -EINVAL;
>> + }
>> +
>> + rmem = devm_kcalloc(dev, res_mem_count,
>> + sizeof(struct reserved_mem *), GFP_KERNEL);
>> + if (!rmem)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < res_mem_count; i++) {
>> + rmem_np = of_parse_phandle(np, "memory-region", i);
>> + if (!rmem_np)
>> + goto release_rmem;
>> +
>> + rmem[i] = of_reserved_mem_lookup(rmem_np);
>> + if (!rmem[i]) {
>> + of_node_put(rmem_np);
>> + goto release_rmem;
>> + }
>> +
>> + of_node_put(rmem_np);
>> + }
>> +
>> + r5_core->rmem_count = res_mem_count;
>> + r5_core->rmem = rmem;
>> + return 0;
>> +
>> +release_rmem:
>> + for (i--; i > -1; i--)
>> + kfree(rmem[i]);
>> + devm_kfree(dev, rmem);
>> + return -ENOMEM;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_core_init()
>> + * Create and initialize zynqmp_r5_core type object
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
>> + enum rpu_oper_mode fw_reg_val, int tcm_mode)
>> +{
>> + int ret, i;
>> + struct zynqmp_r5_core *r5_core;
>> + struct device *dev = cluster->dev;
>> +
>> + ret = zynqmp_r5_get_tcm_node(cluster);
>> + if (ret < 0) {
>> + dev_err(dev, "can't get tcm node, err %d\n", ret);
>> + return ret;
>> + }
>> +
>> + for (i = 0; i < cluster->core_count; i++) {
>> + r5_core = cluster->r5_cores[i];
>> +
>> + ret = zynqmp_r5_get_mem_region_node(r5_core);
>> + if (ret)
>> + dev_warn(dev, "memory-region prop failed %d\n", ret);
>> +
>> + /* Initialize r5 cores with power-domains parsed from dts */
>> + ret = of_property_read_u32_index(r5_core->np, "power-domains",
>> + 1, &r5_core->pm_domain_id);
>> + if (ret) {
>> + dev_err(dev, "failed to get power-domains property\n");
>> + return ret;
>> + }
>> +
>> + ret = zynqmp_r5_set_mode(r5_core, fw_reg_val, tcm_mode);
>> + if (ret) {
>> + dev_err(dev, "failed to set r5 cluster mode %d, err %d\n",
>> + cluster->mode, ret);
>> + return ret;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_cluster_init()
>> + * Create and initialize zynqmp_r5_cluster type object
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
>> +{
>> + struct device *dev = cluster->dev;
>> + struct device_node *dev_node = dev_of_node(dev);
>> + struct device_node *child;
>> + struct platform_device *child_pdev;
>> + int core_count, ret, i;
>> + enum zynqmp_r5_cluster_mode cluster_mode = LOCKSTEP_MODE;
>> + struct zynqmp_r5_core **r5_cores;
>> + enum rpu_tcm_comb tcm_mode;
>> + enum rpu_oper_mode fw_reg_val;
>> +
>> + ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode);
>> +
>> + /*
>> + * on success returns 0, if not defined then returns -EINVAL,
>> + * In that case, default is LOCKSTEP mode
>> + */
>> + if (ret != -EINVAL && ret != 0) {
>> + dev_err(dev, "Invalid xlnx,cluster-mode property\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * For now driver only supports split mode and lockstep mode.
>> + * fail driver probe if either of that is not set in dts.
>> + */
>> + if (cluster_mode == LOCKSTEP_MODE) {
>> + tcm_mode = PM_RPU_TCM_COMB;
>> + fw_reg_val = PM_RPU_MODE_LOCKSTEP;
>> + } else if (cluster_mode == SPLIT_MODE) {
>> + tcm_mode = PM_RPU_TCM_SPLIT;
>> + fw_reg_val = PM_RPU_MODE_SPLIT;
>> + } else {
>> + dev_err(dev, "driver does not support cluster mode %d\n", cluster_mode);
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * Number of cores is decided by number of child nodes of
>> + * r5f subsystem node in dts. If Split mode is used in dts
>> + * 2 child nodes are expected.
>> + * In lockstep mode if two child nodes are available,
>> + * only use first child node and consider it as core0
>> + * and ignore core1 dt node.
>> + */
>> + core_count = of_get_available_child_count(dev_node);
>> + if (core_count <= 0) {
>> + dev_err(dev, "Invalid number of r5 cores %d", core_count);
>> + return -EINVAL;
>> + } else if (cluster_mode == SPLIT_MODE && core_count != 2) {
>> + dev_err(dev, "Invalid number of r5 cores for split mode\n");
>> + return -EINVAL;
>> + } else if (cluster_mode == LOCKSTEP_MODE && core_count == 2) {
>> + dev_warn(dev, "Only r5 core0 will be used\n");
>> + core_count = 1;
>> + }
>> +
>> + r5_cores = kcalloc(core_count,
>> + sizeof(struct zynqmp_r5_core *), GFP_KERNEL);
>> + if (!r5_cores)
>> + return -ENOMEM;
>> +
>> + i = 0;
>> + for_each_available_child_of_node(dev_node, child) {
>> + child_pdev = of_find_device_by_node(child);
>> + if (!child_pdev) {
>> + of_node_put(child);
>> + ret = -ENODEV;
>> + goto release_r5_cores;
>> + }
>> +
>> + /* create and add remoteproc instance of type struct rproc */
>> + r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev);
>> + if (IS_ERR(r5_cores[i])) {
>> + of_node_put(child);
>> + ret = PTR_ERR(r5_cores[i]);
>> + goto release_r5_cores;
>> + }
>> +
>> + i++;
>> +
>> + /*
>> + * If two child nodes are available in dts in lockstep mode,
>> + * then ignore second child node.
>> + */
>> + if (i == core_count) {
>> + of_node_put(child);
>> + break;
>> + }
>> + }
>> +
>> + cluster->mode = cluster_mode;
>> + cluster->core_count = core_count;
>> + cluster->r5_cores = r5_cores;
>> +
>> + ret = zynqmp_r5_core_init(cluster, fw_reg_val, tcm_mode);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to init r5 core err %d\n", ret);
>> + cluster->core_count = 0;
>> + cluster->r5_cores = NULL;
>> + goto release_r5_cores;
>> + }
>> +
>> + return 0;
>> +
>> +release_r5_cores:
>> + for (i--; i > -1; i--) {
>> + put_device(r5_cores[i]->dev);
>> + rproc_del(r5_cores[i]->rproc);
>> + }
>> + kfree(r5_cores);
>> + return ret;
>> +}
>> +
>> +static void zynqmp_r5_core_exit(struct zynqmp_r5_core *r5_core)
>> +{
>> + /* release r5_core device */
>> + put_device(r5_core->dev);
>> +
>> + rproc_del(r5_core->rproc);
>> +}
>> +
>> +static void zynqmp_r5_cluster_exit(void *data)
>> +{
>> + struct platform_device *pdev = (struct platform_device *)data;
>> + struct zynqmp_r5_cluster *cluster;
>> + int i;
>> +
>> + cluster = (struct zynqmp_r5_cluster *)platform_get_drvdata(pdev);
>> + if (!cluster)
>> + return;
>> +
>> + for (i = 0; i < cluster->core_count; i++) {
>> + zynqmp_r5_core_exit(cluster->r5_cores[i]);
>> + cluster->r5_cores[i] = NULL;
>> + }
>> +
>> + kfree(cluster->r5_cores);
>> + kfree(cluster);
>> + platform_set_drvdata(pdev, NULL);
>> +}
>> +
>> +/*
>> + * zynqmp_r5_remoteproc_probe()
>> + *
>> + * @pdev: domain platform device for R5 cluster
>> + *
>> + * called when driver is probed, for each R5 core specified in DT,
>> + * setup as needed to do remoteproc-related operations
>> + *
>> + * Return: 0 for success, negative value for failure.
>> + */
>> +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct zynqmp_r5_cluster *cluster;
>> + struct device *dev = &pdev->dev;
>> +
>> + cluster = kzalloc(sizeof(*cluster), GFP_KERNEL);
>> + if (!cluster)
>> + return -ENOMEM;
>> +
>> + cluster->dev = dev;
>> +
>> + ret = devm_of_platform_populate(dev);
>> + if (ret) {
>> + dev_err_probe(dev, ret, "failed to populate platform dev\n");
>> + kfree(cluster);
>> + return ret;
>> + }
>> +
>> + /* wire in so each core can be cleaned up at driver remove */
>> + platform_set_drvdata(pdev, cluster);
>> +
>> + ret = zynqmp_r5_cluster_init(cluster);
>> + if (ret) {
>> + zynqmp_r5_cluster_exit(pdev);
>> + dev_err_probe(dev, ret, "Invalid r5f subsystem device tree\n");
>> + return ret;
>> + }
>> +
>> + ret = devm_add_action_or_reset(dev, zynqmp_r5_cluster_exit, pdev);
> I am still not convinced you need to use the devm_add_action_or_reset() API as
> opposed to a simple platform_driver::remove function, but this is something we
> can tackle in another revision.
Ok for now, I will keep it as it is.
> I am done reviewing this driver.
>
> Thanks,
> Mathieu
>
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +/* Match table for OF platform binding */
>> +static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
>> + { .compatible = "xlnx,zynqmp-r5fss", },
>> + { /* end of list */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
>> +
>> +static struct platform_driver zynqmp_r5_remoteproc_driver = {
>> + .probe = zynqmp_r5_remoteproc_probe,
>> + .driver = {
>> + .name = "zynqmp_r5_remoteproc",
>> + .of_match_table = zynqmp_r5_remoteproc_match,
>> + },
>> +};
>> +module_platform_driver(zynqmp_r5_remoteproc_driver);
>> +
>> +MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
>> +MODULE_AUTHOR("Xilinx Inc.");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.25.1
>>
1 year, 10 months
- 1
- 0
Re: [PATCH v8 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver
by Tanmay Shah
Hi Mathieu,
Thanks for reviews. I will address all the comments in this email in
next revision.
Thanks,
Tanmay
On 6/7/22 9:52 AM, Mathieu Poirier wrote:
> Hi Tanmay,
>
> On Thu, Jun 02, 2022 at 01:38:34PM -0700, Tanmay Shah wrote:
>> This driver enables r5f dual core Real time Processing Unit subsystem
>> available on Xilinx Zynq Ultrascale MPSoC Platform. RPU subsystem
>> (cluster) can be configured in different modes e.g. split mode in which
>> two r5f cores work independent of each other and lock-step mode in which
>> both r5f cores execute same code clock-for-clock and notify if the
>> result is different.
>>
>> The Xilinx r5 Remoteproc Driver boots the RPU cores via calls to the Xilinx
>> Platform Management Unit that handles the R5 configuration, memory access
>> and R5 lifecycle management. The interface to this manager is done in this
>> driver via zynqmp_pm_* function calls.
>>
>> Signed-off-by: Ben Levinsky <ben.levinsky(a)xilinx.com>
>> Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
>> ---
>>
>> Changes in v8:
>> - None
>>
>> Changes in v7:
>> - None
>>
>> Changes in v6:
>> - None
>>
>> Changes in v5:
>> - None
>>
>> Changes in v4:
>> - Remove redundant header files
>> - use dev_err_probe() to report errors during probe
>> - Fix missing check on error code returned by zynqmp_r5_add_rproc_core()
>> - Fix memory leaks all over the driver when resource allocation fails for any core
>> - make cluster mode check only at one place
>> - remove redundant initialization of variable
>> - remove redundant use of of_node_put()
>> - Fix Comment format problem
>> - Assign offset of zynqmp_tcm_banks instead of duplicating it
>> - Add tcm and memory regions rproc carveouts during prepare instead of parse_fw
>> - Remove rproc_mem_entry object from r5_core
>> - Use put_device() and rproc_del() APIs to fix memory leaks
>> - Replace pr_* with dev_*. This was missed in v3, fix now.
>> - Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was suggested by checkpatch script.
>>
>> Changes in v3:
>> - Fix checkpatch script indentation warning
>> - Remove unused variable from xilinx remoteproc driver
>> - use C style comments, i.e /*...*/
>> - Remove redundant debug information which can be derived using /proc/device-tree
>> - Fix multilined comment format
>> - s/"final fot TCM"/"final for TCM"
>> - Function devm_kzalloc() does not return an code on error, just NULL.
>> Remove redundant error check for this function throughout the driver.
>> - Fix RPU mode configuration and add documentation accordingly
>> - Get rid of the indentations to match function documentation style with rest of the driver
>> - Fix memory leak by only using r5_rproc->priv and not replace it with new instance
>> - Use 'i' for the outer loop and 'j' for the inner one as per convention
>> - Remove redundant error and NULL checks throughout the driver
>> - Use devm_kcalloc() when more than one element is required
>> - Add memory-regions carveouts during driver probe instead of parse_fw call
>> This removes redundant copy of reserved_mem object in r5_core structure.
>> - Fix memory leak by using of_node_put()
>> - Fix indentation of tcm_mem_map function args
>> - Remove redundant init of variables
>> - Initialize tcm bank size variable for lockstep mode
>> - Replace u32 with phys_addr_t for variable stroing memory bank address
>> - Add documentation of TCM behavior in lockstep mode
>> - Use dev_get_drvdata instead of platform driver API
>> - Remove info level messages
>> - Fix checkpatch.pl warnings
>> - Add documentation for the Xilinx r5f platform to understand driver design
>> drivers/remoteproc/Kconfig | 12 +
>> drivers/remoteproc/Makefile | 1 +
>> drivers/remoteproc/xlnx_r5_remoteproc.c | 1045 +++++++++++++++++++++++
>> 3 files changed, 1058 insertions(+)
>> create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c
>>
>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>> index 166019786653..5637a71c0677 100644
>> --- a/drivers/remoteproc/Kconfig
>> +++ b/drivers/remoteproc/Kconfig
>> @@ -352,6 +352,18 @@ config TI_K3_R5_REMOTEPROC
>> It's safe to say N here if you're not interested in utilizing
>> a slave processor.
>>
>> +config XLNX_R5_REMOTEPROC
>> + tristate "Xilinx R5 remoteproc support"
>> + depends on PM && ARCH_ZYNQMP
>> + depends on ZYNQMP_FIRMWARE
>> + select RPMSG_VIRTIO
>> + select ZYNQMP_IPI_MBOX
>> + help
>> + Say y or m here to support Xilinx R5 remote processors via the remote
>> + processor framework.
>> +
>> + It's safe to say N if not interested in using RPU r5f cores.
>> +
>> endif # REMOTEPROC
>>
>> endmenu
>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>> index 5478c7cb9e07..91314a9b43ce 100644
>> --- a/drivers/remoteproc/Makefile
>> +++ b/drivers/remoteproc/Makefile
>> @@ -38,3 +38,4 @@ obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
>> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
>> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
>> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
>> +obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
>> diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
>> new file mode 100644
>> index 000000000000..394b3469463c
>> --- /dev/null
>> +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
>> @@ -0,0 +1,1045 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * ZynqMP R5 Remote Processor driver
>> + *
>> + */
>> +
>> +#include <dt-bindings/power/xlnx-zynqmp-power.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/firmware/xlnx-zynqmp.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc.h>
>> +#include <linux/slab.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +/* settings for RPU cluster mode */
>> +enum zynqmp_r5_cluster_mode {
>> + SPLIT_MODE = 0, /* When cores run as separate processor */
>> + LOCKSTEP_MODE = 1, /* cores execute same code in lockstep,clk-for-clk */
>> + SINGLE_CPU_MODE = 2, /* core0 is held in reset and only core1 runs */
>> +};
>> +
>> +/**
>> + * struct mem_bank_data - Memory Bank description
>> + *
>> + * @addr: Start address of memory bank
>> + * @size: Size of Memory bank
>> + * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off
>> + * @bank_name: name of the bank for remoteproc framework
>> + */
>> +struct mem_bank_data {
>> + phys_addr_t addr;
>> + size_t size;
>> + u32 pm_domain_id;
>> + char *bank_name;
>> +};
>> +
>> +static const struct mem_bank_data zynqmp_tcm_banks[] = {
>> + {0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
>> + {0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
>> + {0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
>> + {0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
>> +};
>> +
>> +/**
>> + * struct zynqmp_r5_core - ZynqMP R5 core structure
>> + *
>> + * @dev: device of RPU instance
>> + * @np: device node of RPU instance
>> + * @tcm_bank_count: number TCM banks accessible to this RPU
>> + * @tcm_banks: array of each TCM bank data
>> + * @rmem_count: Number of reserved mem regions
>> + * @rmem: reserved memory region nodes from device tree
>> + * @rproc: rproc handle
>> + * @pm_domain_id: RPU CPU power domain id
>> + */
>> +struct zynqmp_r5_core {
>> + struct device *dev;
>> + struct device_node *np;
>> + int tcm_bank_count;
>> + struct mem_bank_data **tcm_banks;
>> + int rmem_count;
>> + struct reserved_mem **rmem;
>> + struct rproc *rproc;
>> + u32 pm_domain_id;
>> +};
>> +
>> +/**
>> + * struct zynqmp_r5_cluster - ZynqMP R5 cluster structure
>> + *
>> + * @dev: r5f subsystem cluster device node
>> + * @mode: cluster mode of type zynqmp_r5_cluster_mode
>> + * @core_count: number of r5 cores used for this cluster mode
>> + * @r5_cores: Array of pointers pointing to r5 core
>> + */
>> +struct zynqmp_r5_cluster {
>> + struct device *dev;
>> + enum zynqmp_r5_cluster_mode mode;
>> + int core_count;
>> + struct zynqmp_r5_core **r5_cores;
>> +};
>> +
>> +/*
>> + * zynqmp_r5_set_mode - set RPU operation mode
>> + *
>> + * set RPU operation mode
>> + *
>> + * Return: 0 for success, negative value for failure
>> + */
>> +static int zynqmp_r5_set_mode(struct zynqmp_r5_core *r5_core,
>> + enum rpu_oper_mode fw_reg_val,
>> + enum rpu_tcm_comb tcm_mode)
>> +{
>> + int ret;
>> +
>> + ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val);
>> + if (ret < 0) {
>> + dev_err(r5_core->dev, "failed to set RPU mode\n");
>> + return ret;
>> + }
>> +
>> + ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id, tcm_mode);
>> + if (ret < 0)
>> + dev_err(r5_core->dev, "failed to configure TCM\n");
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_start
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Start R5 Core from designated boot address.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_rproc_start(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core = rproc->priv;
>> + enum rpu_boot_mem bootmem;
>> + int ret;
>> +
>> + /*
>> + * The exception vector pointers (EVP) refer to the base-address of
>> + * exception vectors (for reset, IRQ, FIQ, etc). The reset-vector
>> + * starts at the base-address and subsequent vectors are on 4-byte
>> + * boundaries.
>> + *
>> + * Exception vectors can start either from 0x0000_0000 (LOVEC) or
>> + * from 0xFFFF_0000 (HIVEC) which is mapped in the OCM (On-Chip Memory)
>> + *
>> + * Usually firmware will put Exception vectors at LOVEC.
>> + *
>> + * It is not recommend that you change the exception vector.
>> + * Changing the EVP to HIVEC will result in increased interrupt latency
>> + * and jitter. Also, if the OCM is secured and the Cortex-R5F processor
>> + * is non-secured, then the Cortex-R5F processor cannot access the
>> + * HIVEC exception vectors in the OCM.
>> + */
>> + bootmem = (rproc->bootaddr >= 0xFFFC0000) ?
>> + PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC;
>> +
>> + dev_dbg(r5_core->dev, "RPU boot addr 0x%llx from %s.", rproc->bootaddr,
>> + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM");
>> +
>> + ret = zynqmp_pm_request_wake(r5_core->pm_domain_id, 1,
>> + bootmem, ZYNQMP_PM_REQUEST_ACK_NO);
>> + if (ret)
>> + dev_err(r5_core->dev,
>> + "failed to start RPU = 0x%x\n", r5_core->pm_domain_id);
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_stop
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Power down R5 Core.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_rproc_stop(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core = rproc->priv;
>> + int ret;
>> +
>> + ret = zynqmp_pm_force_pwrdwn(r5_core->pm_domain_id,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret)
>> + dev_err(r5_core->dev, "failed to stop remoteproc RPU %d\n", ret);
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_mem_region_map
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to map
>> + *
>> + * Callback to map va for memory-region's carveout.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_mem_region_map(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + void __iomem *va;
>> +
>> + va = ioremap_wc(mem->dma, mem->len);
>> + if (IS_ERR_OR_NULL(va))
>> + return -ENOMEM;
>> +
>> + mem->va = (void *)va;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_mem_unmap
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to unmap
>> + *
>> + * Unmap memory-region carveout
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_mem_region_unmap(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + iounmap((void __iomem *)mem->va);
>> + return 0;
>> +}
>> +
>> +/*
>> + * add_mem_regions
>> + * @r5_core: single R5 core's corresponding zynqmp_r5_core type instance
>> + * @rmem: reserved mem region parsed from dt node
>> + *
>> + * Construct rproc mem carveouts from carveout provided in
>> + * memory-region property
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int add_mem_regions_carveout(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core;
>> + struct reserved_mem *rmem;
>> + struct rproc_mem_entry **rproc_mem;
>> + int i, num_mem_regions;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + num_mem_regions = r5_core->rmem_count;
>> +
>> + /* memory regions not defined */
>> + if (num_mem_regions < 1)
>> + return 0;
>> +
>> + rproc_mem = kcalloc(num_mem_regions,
>> + sizeof(struct rproc_mem_entry *), GFP_KERNEL);
>> + if (!rproc_mem)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < num_mem_regions; i++) {
>> + rmem = r5_core->rmem[i];
>> +
>> + /* Register associated reserved memory regions */
>> + rproc_mem[i] = rproc_mem_entry_init(&rproc->dev, NULL,
>> + (dma_addr_t)rmem->base,
>> + rmem->size, rmem->base,
>> + zynqmp_r5_mem_region_map,
>> + zynqmp_r5_mem_region_unmap,
>> + rmem->name);
>> + if (!rproc_mem[i])
>> + goto release_mem_regions;
>> +
>> + dev_dbg(&rproc->dev, "reserved mem carveout %s addr=%llx, size=0x%llx",
>> + rmem->name, rmem->base, rmem->size);
>> + }
>> +
>> + /*
>> + * Add carveouts only if all rproc mem enties are
>> + * successfully initialized
>> + */
>> + for (i = 0; i < num_mem_regions; i++)
>> + rproc_add_carveout(rproc, rproc_mem[i]);
>> +
>> + kfree(rproc_mem);
>> + return 0;
>> +
>> +release_mem_regions:
>> + for (i--; i > -1; i--)
>> + kfree(rproc_mem[i]);
>> + kfree(rproc_mem);
>> + return -ENOMEM;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_rproc_mem_unmap
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to unmap
>> + *
>> + * Unmap TCM banks when powering down R5 core.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int tcm_mem_unmap(struct rproc *rproc, struct rproc_mem_entry *mem)
>> +{
>> + iounmap((void __iomem *)mem->va);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * tcm_mem_map
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @mem: mem entry to initialize the va and da fields of
>> + *
>> + * Given TCM bank entry, this callback will set device address for R5
>> + * running on TCM and also setup virtual address for TCM bank
>> + * remoteproc carveout.
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int tcm_mem_map(struct rproc *rproc,
>> + struct rproc_mem_entry *mem)
>> +{
>> + void __iomem *va;
>> +
>> + va = ioremap_wc(mem->dma, mem->len);
>> + if (IS_ERR_OR_NULL(va))
>> + return -ENOMEM;
>> +
>> + /* Update memory entry va */
>> + mem->va = (void *)va;
>> +
>> + /* clear TCMs */
>> + memset_io(va, 0, mem->len);
>> +
>> + /*
>> + * The R5s expect their TCM banks to be at address 0x0 and 0x2000,
>> + * while on the Linux side they are at 0xffexxxxx.
>> + *
>> + * Zero out the high 12 bits of the address. This will give
>> + * expected values for TCM Banks 0A and 0B (0x0 and 0x20000).
>> + */
>> + mem->da &= 0x000fffff;
>> +
>> + /*
>> + * TCM Banks 1A and 1B still have to be translated.
>> + *
>> + * Below handle these two banks' absolute addresses (0xffe90000 and
>> + * 0xffeb0000) and convert to the expected relative addresses
>> + * (0x0 and 0x20000).
>> + */
>> + if (mem->da == 0x90000 || mem->da == 0xB0000)
>> + mem->da -= 0x90000;
>> +
>> + /* if translated TCM bank address is not valid report error */
>> + if (mem->da != 0x0 && mem->da != 0x20000) {
>> + dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da);
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static int add_tcm_carveout_split_mode(struct rproc *rproc)
>> +{
>> + int i, num_banks, ret;
>> + struct rproc_mem_entry **rproc_mem;
>> + u32 pm_domain_id;
>> + phys_addr_t bank_addr;
>> + size_t bank_size;
>> + char *bank_name;
>> + struct device *dev;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> +
>> + dev = r5_core->dev;
>> +
>> + /* go through zynqmp banks for r5 node */
>> + num_banks = r5_core->tcm_bank_count;
>> + if (num_banks <= 0) {
>> + dev_err(dev, "need to specify TCM banks\n");
>> + return -EINVAL;
>> + }
>> +
>> + rproc_mem = kcalloc(num_banks,
>> + sizeof(struct rproc_mem_entry *), GFP_KERNEL);
>> + if (!rproc_mem)
>> + return -ENOMEM;
>> +
>> + /*
>> + * Power-on Each 64KB TCM,
>> + * register its address space, map and unmap functions
>> + * and add carveouts accordingly
>> + */
>> + for (i = 0; i < num_banks; i++) {
>> + bank_addr = r5_core->tcm_banks[i]->addr;
>> + bank_name = r5_core->tcm_banks[i]->bank_name;
>> + bank_size = r5_core->tcm_banks[i]->size;
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> +
>> + ret = zynqmp_pm_request_node(pm_domain_id,
>> + ZYNQMP_PM_CAPABILITY_ACCESS, 0,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
>> + goto release_tcm_split;
>> + }
>> +
>> + dev_dbg(dev, "TCM carveout split mode %s addr=%llx, size=0x%lx",
>> + bank_name, bank_addr, bank_size);
>> +
>> + rproc_mem[i] = rproc_mem_entry_init(dev, NULL, bank_addr,
>> + bank_size, bank_addr,
>> + tcm_mem_map, tcm_mem_unmap,
>> + bank_name);
>> + if (!rproc_mem[i]) {
>> + ret = -ENOMEM;
>> + goto release_tcm_split;
>> + }
>> + }
>> +
>> + /*
>> + * Add carveouts only if all rproc mem enties are
>> + * successfully initialized
>> + */
>> + for (i = 0; i < num_banks; i++)
>> + rproc_add_carveout(rproc, rproc_mem[i]);
>> +
>> + kfree(rproc_mem);
>> + return 0;
>> +
>> +release_tcm_split:
>> + /* If failed, Turn off all TCM banks turned on before */
>> + for (i--; i > -1; i--) {
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + zynqmp_pm_release_node(pm_domain_id);
>> + kfree(rproc_mem[i]);
>> + }
>> + kfree(rproc_mem);
>> + return ret;
>> +}
>> +
>> +static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
>> +{
>> + int i, num_banks, ret;
>> + struct rproc_mem_entry *rproc_mem;
>> + u32 pm_domain_id;
>> + phys_addr_t bank_addr;
>> + size_t bank_size = 0;
>> + char *bank_name;
>> + struct device *dev;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + dev = r5_core->dev;
>> +
>> + /* Go through zynqmp banks for r5 node */
>> + num_banks = r5_core->tcm_bank_count;
>> + if (num_banks <= 0) {
>> + dev_err(dev, "need to specify TCM banks\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * In lockstep mode, TCM is contiguous memory block
>> + * However, each TCM block still needs to be enabled individually.
>> + * So, Enable each TCM block individually, but add their size
>> + * to create contiguous memory region.
>> + */
>> + bank_addr = r5_core->tcm_banks[0]->addr;
>> + bank_name = r5_core->tcm_banks[0]->bank_name;
>> +
>> + for (i = 0; i < num_banks; i++) {
>> + bank_size += r5_core->tcm_banks[i]->size;
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> +
>> + /* Turn on each TCM bank individually */
>> + ret = zynqmp_pm_request_node(pm_domain_id,
>> + ZYNQMP_PM_CAPABILITY_ACCESS, 0,
>> + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
>> + goto release_tcm_lockstep;
>> + }
>> + }
>> +
>> + dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%llx, size=0x%lx",
>> + bank_name, bank_addr, bank_size);
>> +
>> + /* Register TCM address range, TCM map and unmap functions */
>> + rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
>> + bank_size, bank_addr,
>> + tcm_mem_map, tcm_mem_unmap,
>> + bank_name);
>> + if (!rproc_mem) {
>> + ret = -ENOMEM;
>> + goto release_tcm_lockstep;
>> + }
>> +
>> + /* If registration is success, add carveouts */
>> + rproc_add_carveout(rproc, rproc_mem);
>> +
>> + return 0;
>> +
>> +release_tcm_lockstep:
>> + /* If failed, Turn off all TCM banks turned on before */
>> + for (i--; i > -1; i--) {
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + zynqmp_pm_release_node(pm_domain_id);
>> + }
>> + return ret;
>> +}
>> +
>> +/*
>> + * add_tcm_banks()
>> + * @rproc: single R5 core's corresponding rproc instance
>> + *
>> + * Given R5 node in remoteproc instance
>> + * allocate remoteproc carveout for TCM memory
>> + * needed for firmware to be loaded
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int add_tcm_banks(struct rproc *rproc)
>> +{
>> + struct device *dev;
>> + struct zynqmp_r5_cluster *cluster;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> + if (!r5_core)
>> + return -EINVAL;
>> +
>> + dev = r5_core->dev;
>> +
>> + cluster = dev_get_drvdata(dev->parent);
>> + if (!cluster) {
>> + dev_err(dev->parent, "Invalid driver data\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * In lockstep mode TCM banks are one contiguous memory region of 256Kb
>> + * In split mode, each TCM bank is 64Kb and not contiguous.
>> + * We add memory carveouts accordingly.
>> + */
>> + if (cluster->mode == SPLIT_MODE)
>> + return add_tcm_carveout_split_mode(rproc);
>> + else if (cluster->mode == LOCKSTEP_MODE)
>> + return add_tcm_carveout_lockstep_mode(rproc);
>> +
>> + dev_err(cluster->dev, "invalid cluster mode\n");
>> + return -EINVAL;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_parse_fw()
>> + * @rproc: single R5 core's corresponding rproc instance
>> + * @fw: ptr to firmware to be loaded onto r5 core
>> + *
>> + * When loading firmware, ensure the necessary carveouts are in remoteproc
>> + *
>> + * return 0 on success, otherwise non-zero value on failure
>> + */
>> +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
>> +{
>> + int ret;
>> +
>> + ret = rproc_elf_load_rsc_table(rproc, fw);
>> + if (ret == -EINVAL) {
>> + /*
>> + * resource table only required for IPC.
>> + * if not present, this is not necessarily an error;
>> + * for example, loading r5 hello world application
>> + * so simply inform user and keep going.
>> + */
>> + dev_info(&rproc->dev, "no resource table found.\n");
>> + ret = 0;
>> + }
>> + return ret;
>> +}
>> +
>> +static int zynqmp_r5_rproc_prepare(struct rproc *rproc)
>> +{
>> + int ret = 0;
>> +
>> + ret = add_tcm_banks(rproc);
>> + if (ret) {
>> + dev_err(&rproc->dev, "failed to get TCM banks, err %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = add_mem_regions_carveout(rproc);
>> + if (ret)
>> + dev_warn(&rproc->dev, "failed to get reserve mem regions %d\n",
>> + ret);
>> +
>> + return 0;
>> +}
>> +
>> +static int zynqmp_r5_rproc_unprepare(struct rproc *rproc)
>> +{
>> + struct zynqmp_r5_core *r5_core;
>> + int i;
>> + u32 pm_domain_id;
>> +
>> + r5_core = (struct zynqmp_r5_core *)rproc->priv;
>> +
>> + for (i = 0; i < r5_core->tcm_bank_count; i++) {
>> + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
>> + if (zynqmp_pm_release_node(pm_domain_id))
>> + dev_warn(r5_core->dev,
>> + "can't turn off TCM bank 0x%x", pm_domain_id);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct rproc_ops zynqmp_r5_rproc_ops = {
>> + .prepare = zynqmp_r5_rproc_prepare,
>> + .unprepare = zynqmp_r5_rproc_unprepare,
>> + .start = zynqmp_r5_rproc_start,
>> + .stop = zynqmp_r5_rproc_stop,
>> + .load = rproc_elf_load_segments,
>> + .parse_fw = zynqmp_r5_parse_fw,
>> + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>> + .sanity_check = rproc_elf_sanity_check,
>> + .get_boot_addr = rproc_elf_get_boot_addr,
>> +};
>> +
>> +/**
>> + * zynqmp_r5_add_rproc_core()
>> + * Probes ZynqMP R5 processor device node
>> + * this is called for each individual R5 core
>> + *
>> + * @cdev: Device node of each r5 core
>> + *
>> + * Return: zynqmp_r5_core object for success, error pointer in case of error.
>> + */
>> +static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
>> +{
>> + int ret;
>> + struct rproc *r5_rproc;
>> + struct zynqmp_r5_core *r5_core;
>> +
>> + /* Set up DMA mask */
>> + ret = dma_set_coherent_mask(cdev, DMA_BIT_MASK(32));
>> + if (ret)
>> + return ERR_PTR(ret);
>> +
>> + /* Allocate remoteproc instance */
>> + r5_rproc = devm_rproc_alloc(cdev, dev_name(cdev),
>> + &zynqmp_r5_rproc_ops,
>> + NULL, sizeof(struct zynqmp_r5_core));
> Not sure why devm_rproc_alloc() is used when rproc_add() is used below and
> rproc_del() in zynqmp_r5_core_exit().
>
>> + if (!r5_rproc) {
>> + dev_err(cdev, "failed to allocate memory for rproc instance\n");
>> + return ERR_PTR(-ENOMEM);
>> + }
>> +
>> + r5_rproc->auto_boot = false;
>> + r5_core = (struct zynqmp_r5_core *)r5_rproc->priv;
>> + r5_core->dev = cdev;
>> + r5_core->np = dev_of_node(cdev);
>> + if (!r5_core->np) {
>> + dev_err(cdev, "can't get device node for r5 core\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + /* Add R5 remoteproc core */
>> + ret = rproc_add(r5_rproc);
>> + if (ret) {
>> + dev_err(cdev, "failed to add r5 remoteproc\n");
>> + return ERR_PTR(ret);
>> + }
>> +
>> + r5_core->rproc = r5_rproc;
>> + return r5_core;
>> +}
>> +
>> +/**
>> + * zynqmp_r5_get_tcm_node()
>> + * Ideally this function should parse tcm node and store information
>> + * in r5_core instance. We will use hardcoded TCM information from
>> + * driver for now in this function.
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_get_tcm_node(struct zynqmp_r5_cluster *cluster)
>> +{
>> + int tcm_bank_count, tcm_node;
>> + int i, j;
>> + struct zynqmp_r5_core *r5_core;
>> + struct device *dev = cluster->dev;
> struct device *dev = cluster->dev;
> struct zynqmp_r5_core *r5_core;
> int tcm_bank_count, tcm_node;
> int i, j;
>
>> +
>> + /*
>> + * ToDo: Use predefined TCM address space values from driver until
> s/until/while
>
>> + * system-dt spec is not final for TCM
>> + */
>> + tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks);
>> +
>> + /* count per core tcm banks */
>> + tcm_bank_count = tcm_bank_count / cluster->core_count;
>> +
>> + /*
>> + * r5 core 0 will use all of TCM banks in lockstep mode.
>> + * In split mode, r5 core0 will use 128k and r5 core1 will use another
>> + * 128k. Assign TCM banks to each core accordingly
>> + */
>> + tcm_node = 0;
>> + for (i = 0; i < cluster->core_count; i++) {
>> + r5_core = cluster->r5_cores[i];
>> + r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
>> + sizeof(struct mem_bank_data *),
>> + GFP_KERNEL);
>> + if (!r5_core->tcm_banks)
>> + return -ENOMEM;
>> +
>> + for (j = 0; j < tcm_bank_count; j++) {
>> + /*
>> + * Use pre-defined TCM reg values.
>> + * Eventually this should be replaced by values
>> + * parsed from dts.
>> + */
>> + r5_core->tcm_banks[j] =
>> + (struct mem_bank_data *)&zynqmp_tcm_banks[tcm_node];
>> + tcm_node++;
>> + }
>> +
>> + r5_core->tcm_bank_count = tcm_bank_count;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/**
>> + * zynqmp_r5_get_mem_region_node()
>> + * parse memory-region property from dt node and add
>> + * memory region carveouts
>> + *
>> + * @r5_core: pointer to zynqmp_r5_core type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_get_mem_region_node(struct zynqmp_r5_core *r5_core)
>> +{
>> + int res_mem_count, i;
>> + struct device *dev;
>> + struct device_node *np, *rmem_np;
>> + struct reserved_mem **rmem;
>> +
>> + dev = r5_core->dev;
>> +
> Extra newline.
>
>> + np = r5_core->np;
>> +
>> + res_mem_count = of_property_count_elems_of_size(np, "memory-region",
>> + sizeof(phandle));
>> + if (res_mem_count <= 0) {
>> + dev_warn(dev, "failed to get memory-region property %d\n",
>> + res_mem_count);
>> + return -EINVAL;
>> + }
>> +
>> + rmem = devm_kcalloc(dev, res_mem_count,
>> + sizeof(struct reserved_mem *), GFP_KERNEL);
>> + if (!rmem)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < res_mem_count; i++) {
>> + rmem_np = of_parse_phandle(np, "memory-region", i);
>> + if (!rmem_np)
>> + goto release_rmem;
>> +
>> + rmem[i] = of_reserved_mem_lookup(rmem_np);
>> + if (!rmem[i]) {
>> + of_node_put(rmem_np);
>> + goto release_rmem;
>> + }
>> +
>> + of_node_put(rmem_np);
>> + }
>> +
>> + r5_core->rmem_count = res_mem_count;
>> + r5_core->rmem = rmem;
>> + return 0;
>> +
>> +release_rmem:
>> + for (i--; i > -1; i--)
> s/"i > -1"/"i >= 0"
>
>> + kfree(rmem[i]);
>> + devm_kfree(dev, rmem);
>> + return -ENOMEM;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_core_init()
>> + * Create and initialize zynqmp_r5_core type object
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
>> + enum rpu_oper_mode fw_reg_val, int tcm_mode)
> I would have expected @tcm_mode to be of type "enum rpu_tcm_comp".
>
>> +{
>> + int ret, i;
>> + struct zynqmp_r5_core *r5_core;
>> + struct device *dev = cluster->dev;
>> +
>> + ret = zynqmp_r5_get_tcm_node(cluster);
>> + if (ret < 0) {
>> + dev_err(dev, "can't get tcm node, err %d\n", ret);
>> + return ret;
>> + }
>> +
>> + for (i = 0; i < cluster->core_count; i++) {
>> + r5_core = cluster->r5_cores[i];
>> +
>> + ret = zynqmp_r5_get_mem_region_node(r5_core);
>> + if (ret)
>> + dev_warn(dev, "memory-region prop failed %d\n", ret);
>> +
>> + /* Initialize r5 cores with power-domains parsed from dts */
>> + ret = of_property_read_u32_index(r5_core->np, "power-domains",
>> + 1, &r5_core->pm_domain_id);
>> + if (ret) {
>> + dev_err(dev, "failed to get power-domains property\n");
>> + return ret;
>> + }
>> +
>> + ret = zynqmp_r5_set_mode(r5_core, fw_reg_val, tcm_mode);
>> + if (ret) {
>> + dev_err(dev, "failed to set r5 cluster mode %d, err %d\n",
>> + cluster->mode, ret);
>> + return ret;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * zynqmp_r5_cluster_init()
>> + * Create and initialize zynqmp_r5_cluster type object
>> + *
>> + * @cluster: pointer to zynqmp_r5_cluster type object
>> + *
>> + * Return: 0 for success and error code for failure.
>> + */
>> +static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
>> +{
>> + struct device *dev = cluster->dev;
>> + struct device_node *dev_node = dev_of_node(dev);
>> + struct device_node *child;
>> + struct platform_device *child_pdev;
>> + int core_count, ret, i;
>> + enum zynqmp_r5_cluster_mode cluster_mode = LOCKSTEP_MODE;
>> + struct zynqmp_r5_core **r5_cores;
>> + enum rpu_tcm_comb tcm_mode;
>> + enum rpu_oper_mode fw_reg_val;
>> +
>> + ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode);
>> +
>> + /*
>> + * on success returns 0, if not defined then returns -EINVAL,
>> + * In that case, default is LOCKSTEP mode
>> + */
>> + if (ret != -EINVAL && ret != 0) {
>> + dev_err(dev, "Invalid xlnx,cluster-mode property\n");
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * For now driver only supports split mode and lockstep mode.
>> + * fail driver probe if either of that is not set in dts.
>> + */
>> + if (cluster_mode == LOCKSTEP_MODE) {
>> + tcm_mode = PM_RPU_TCM_COMB;
>> + fw_reg_val = PM_RPU_MODE_LOCKSTEP;
>> + } else if (cluster_mode == SPLIT_MODE) {
>> + tcm_mode = PM_RPU_TCM_SPLIT;
>> + fw_reg_val = PM_RPU_MODE_SPLIT;
>> + } else {
>> + dev_err(dev, "driver does not support cluster mode %d\n", cluster_mode);
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * Number of cores is decided by number of child nodes of
>> + * r5f subsystem node in dts. If Split mode is used in dts
>> + * 2 child nodes are expected.
>> + * In lockstep mode if two child nodes are available,
>> + * only use first child node and consider it as core0
>> + * and ignore core1 dt node.
>> + */
>> + core_count = of_get_available_child_count(dev_node);
>> + if (core_count <= 0) {
>> + dev_err(dev, "Invalid number of r5 cores %d", core_count);
>> + return -EINVAL;
>> + } else if (cluster_mode == SPLIT_MODE && core_count != 2) {
>> + dev_err(dev, "Invalid number of r5 cores for split mode\n");
>> + return -EINVAL;
>> + } else if (cluster_mode == LOCKSTEP_MODE && core_count == 2) {
>> + dev_warn(dev, "Only r5 core0 will be used\n");
>> + core_count = 1;
>> + }
>> +
>> + r5_cores = kcalloc(core_count,
>> + sizeof(struct zynqmp_r5_core *), GFP_KERNEL);
>> + if (!r5_cores)
>> + return -ENOMEM;
>> +
>> + i = 0;
>> + for_each_available_child_of_node(dev_node, child) {
>> + child_pdev = of_find_device_by_node(child);
> Here a reference to child_pdev->dev is taken...
>
>> + if (!child_pdev) {
>> + of_node_put(child);
>> + ret = -ENODEV;
>> + goto release_r5_cores;
>> + }
>> +
>> + /* create and add remoteproc instance of type struct rproc */
>> + r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev);
>> + if (IS_ERR(r5_cores[i])) {
>> + of_node_put(child);
> If devm_rproc_alloc() fails in zynqmp_r5_add_rproc_core() the reference to
> child_pdev-dev taken above is not released.
>
>
>> + ret = PTR_ERR(r5_cores[i]);
>> + goto release_r5_cores;
>> + }
>> +
>> + i++;
>> +
>> + /*
>> + * If two child nodes are available in dts in lockstep mode,
>> + * then ignore second child node.
>> + */
>> + if (i == core_count) {
>> + of_node_put(child);
>> + break;
>> + }
>> + }
>> +
>> + cluster->mode = cluster_mode;
>> + cluster->core_count = core_count;
>> + cluster->r5_cores = r5_cores;
>> +
>> + ret = zynqmp_r5_core_init(cluster, fw_reg_val, tcm_mode);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to init r5 core err %d\n", ret);
>> + cluster->core_count = 0;
>> + cluster->r5_cores = NULL;
>> + goto release_r5_cores;
>> + }
>> +
>> + return 0;
>> +
>> +release_r5_cores:
>> + for (i--; i > -1; i--) {
> s/"i > -1"/"i >= 0"
>
>> + put_device(r5_cores[i]->dev);
>> + rproc_del(r5_cores[i]->rproc);
>> + }
>> + kfree(r5_cores);
>> + return ret;
>> +}
>> +
>> +static void zynqmp_r5_core_exit(struct zynqmp_r5_core *r5_core)
>> +{
>> + /* release r5_core device */
>> + put_device(r5_core->dev);
>> +
>> + rproc_del(r5_core->rproc);
>> +}
>> +
>> +static void zynqmp_r5_cluster_exit(void *data)
>> +{
>> + struct platform_device *pdev = (struct platform_device *)data;
>> + struct zynqmp_r5_cluster *cluster;
>> + int i;
>> +
>> + cluster = (struct zynqmp_r5_cluster *)platform_get_drvdata(pdev);
>> + if (!cluster)
>> + return;
>> +
>> + for (i = 0; i < cluster->core_count; i++) {
>> + zynqmp_r5_core_exit(cluster->r5_cores[i]);
> I don't see a need for this extra function. Just call put_device() and
> rproc_del() here.
>
>> + cluster->r5_cores[i] = NULL;
> Not sure this is useful since both cluster->r5_cores and cluster are freed
> below.
>
> I will review zynqmp_r5_rproc_ops and up tomorrow and Thursday.
>
> Thanks,
> Mathieu
>
>> + }
>> +
>> + kfree(cluster->r5_cores);
>> + kfree(cluster);
>> + platform_set_drvdata(pdev, NULL);
>> +}
>> +
>> +/*
>> + * zynqmp_r5_remoteproc_probe()
>> + *
>> + * @pdev: domain platform device for R5 cluster
>> + *
>> + * called when driver is probed, for each R5 core specified in DT,
>> + * setup as needed to do remoteproc-related operations
>> + *
>> + * Return: 0 for success, negative value for failure.
>> + */
>> +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct zynqmp_r5_cluster *cluster;
>> + struct device *dev = &pdev->dev;
>> +
>> + cluster = kzalloc(sizeof(*cluster), GFP_KERNEL);
>> + if (!cluster)
>> + return -ENOMEM;
>> +
>> + cluster->dev = dev;
>> +
>> + ret = devm_of_platform_populate(dev);
>> + if (ret) {
>> + dev_err_probe(dev, ret, "failed to populate platform dev\n");
>> + kfree(cluster);
>> + return ret;
>> + }
>> +
>> + /* wire in so each core can be cleaned up at driver remove */
>> + platform_set_drvdata(pdev, cluster);
>> +
>> + ret = zynqmp_r5_cluster_init(cluster);
>> + if (ret) {
>> + zynqmp_r5_cluster_exit(pdev);
>> + dev_err_probe(dev, ret, "Invalid r5f subsystem device tree\n");
>> + return ret;
>> + }
>> +
>> + ret = devm_add_action_or_reset(dev, zynqmp_r5_cluster_exit, pdev);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +/* Match table for OF platform binding */
>> +static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
>> + { .compatible = "xlnx,zynqmp-r5fss", },
>> + { /* end of list */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
>> +
>> +static struct platform_driver zynqmp_r5_remoteproc_driver = {
>> + .probe = zynqmp_r5_remoteproc_probe,
>> + .driver = {
>> + .name = "zynqmp_r5_remoteproc",
>> + .of_match_table = zynqmp_r5_remoteproc_match,
>> + },
>> +};
>> +module_platform_driver(zynqmp_r5_remoteproc_driver);
>> +
>> +MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
>> +MODULE_AUTHOR("Xilinx Inc.");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.25.1
>>
1 year, 10 months
- 1
- 0
Re: [PATCH v8 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
by Tanmay Shah
On 6/9/22 10:33 AM, Rob Herring wrote:
> On Tue, Jun 07, 2022 at 10:32:48AM -0700, Tanmay Shah wrote:
>> Hi Rob,
>>
>> Ping for reviews.
> No need to ping me. You can check status of your patch here:
>
> https://patchwork.ozlabs.org/project/devicetree-bindings/list/
>
> If it is listed, Krzysztof or I will get to it.
Thanks for the link. This is good to know.
> Rob
1 year, 10 months
- 1
- 0
Re: [PATCH v8 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
by Tanmay Shah
HI Rob,
Thanks for reviews. Please find my comments below.
On 6/9/22 10:41 AM, Rob Herring wrote:
> On Fri, Jun 03, 2022 at 08:33:13AM +0200, Peter Korsgaard wrote:
>>>>>>> "Tanmay" == Tanmay Shah <tanmay.shah(a)xilinx.com> writes:
>> Hi,
>>
>> > Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
>> > Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
>> > (cluster).
>>
>> > Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
>> > ---
>>
>> > Changes in v8:
>> > - Add 'items:' for sram property
>>
>> > Changes in v7:
>> > - Add minItems in sram property
>>
>> > Changes in v6:
>> > - Add maxItems to sram and memory-region property
>>
>> > Changes in v5:
>> > - Add constraints of the possible values of xlnx,cluster-mode property
>> > - fix description of power-domains property for r5 core
>> > - Remove reg, address-cells and size-cells properties as it is not required
>> > - Fix description of mboxes property
>> > - Add description of each memory-region and remove old .txt binding link
>> > reference in the description
>>
>> > Changes in v4:
>> > - Add memory-region, mboxes and mbox-names properties in example
>>
>> > Changes in v3:
>> > - None
>>
>> > .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 130 ++++++++++++++++++
>> > include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
>> > 2 files changed, 138 insertions(+)
>> > create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>
>> > diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>> > new file mode 100644
>> > index 000000000000..adfe05ff157a
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>> > @@ -0,0 +1,132 @@
>> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> > +%YAML 1.2
>> > +---
>> > +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> > +
>> > +title: Xilinx R5F processor subsystem
>> > +
>> > +maintainers:
>> > + - Ben Levinsky <ben.levinsky(a)xilinx.com>
>> > + - Tanmay Shah <tanmay.shah(a)xilinx.com>
>> > +
>> > +description: |
>> > + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
>> > + real-time processing based on the Cortex-R5F processor core from ARM.
>> > + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
>> > + floating-point unit that implements the Arm VFPv3 instruction set.
>> > +
>> > +properties:
>> > + compatible:
>> > + const: xlnx,zynqmp-r5fss
>> > +
>> > + xlnx,cluster-mode:
>> > + $ref: /schemas/types.yaml#/definitions/uint32
>> > + enum: [0, 1, 2]
>>
>> A textual mode ("dual", "lock-step", "single") would be more readable.
>>
>>
>> > + description: |
>> > + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
>>
>> space missing before "(Dual-processor"
>>
>>
>> > + lock-step mode(Both RPU cores execute the same code in lock-step,
>> > + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
>>
>> "can be" sounds a bit weak, perhaps "is"
>>
>>
>> > + core 1 runs normally). The processor does not support dynamic configuration.
>> > + Switching between modes is only permitted immediately after a processor reset.
>> > + If set to 1 then lockstep mode and if 0 then split mode.
>> > + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
>>
>> This looks a bit confusing. If you decide to stick to the numerical
>> modes, then at least list them in numerical order, E.G.:
>>
>> 0: split
>> 1: lockstep
>> 2: single
I think the description is fine. for readability I can just add
numerical order as above.
> The bigger issue has been multiple Cortex-R5 bindings all doing their
> own thing for this feature which is not vendor specific (except TI has
> their own extra mode or something). How TCMs are described is the
> other issue. I've just stopped caring because no one listens.
Values used for cluster-mode property for xlnx platform is same as ti's
cluster mode property.
0: split, 1: lockstep and 2: single-cpu mode. It is matching with
ti,k3-r5 bindings.
However, default value for some of the ti platforms are different.
xlnx platforms have single-cpu mode as well.
It will take some time to design system-dt spec for TCM.
So, for now I use hard-code values of TCM from driver.
TCM bindings for linux will be posted once system-dt spec is accepted.
Meanwhile we would like to upstream rest of the bindings and driver.
>
>>> +
>> > +patternProperties:
>> > + "^r5f-[a-f0-9]+$":
>> > + type: object
>> > + description: |
>> > + The RPU is located in the Low Power Domain of the Processor Subsystem.
>> > + Each processor includes separate L1 instruction and data caches and
>> > + tightly coupled memories (TCM). System memory is cacheable, but the TCM
>> > + memory space is non-cacheable.
>> > +
>> > + Each RPU contains one 64KB memory and two 32KB memories that
>> > + are accessed via the TCM A and B port interfaces, for a total of 128KB
>> > + per processor. In lock-step mode, the processor has access to 256KB of
>> > + TCM memory.
>> > +
>> > + properties:
>> > + compatible:
>> > + const: xlnx,zynqmp-r5f
>> > +
>> > + power-domains:
>> > + description: RPU core PM domain specifier
>> > + maxItems: 1
>>
>> A bit more detail would be good, E.G. something like arm/cpus.yaml does:
>>
>> List of phandles and PM domain specifiers, as defined by bindings of the
>> PM domain provider (see also ../power_domain.txt).
>>
>> And the phandle-array ref.
> Both suggestions are wrong. We don't need common properties re-described
> by every user. They already have a type definition too, so we don't need
> to repeat phandle-array ref either.
>
> The existing description is not needed either as it doesn't provide any
> information specific to this binding. You only need to describe each
> entry when there is more than 1 entry because we need to know what each
> entry is and the order.
I will remove current description as well.
Thanks.
>
>>> +
>> > + mboxes:
>> > + minItems: 1
>> > + items:
>> > + - description: mailbox channel to send data to RPU
>> > + - description: mailbox channel to receive data from RPU
>> > +
>> > + mbox-names:
>> > + minItems: 1
>> > + items:
>> > + - const: tx
>> > + - const: rx
>>
>> And here as well for mailbox/mailbox.txt
> Nope!
>
>>
>> > +
>> > + sram:
>> > + $ref: /schemas/types.yaml#/definitions/phandle-array
>> > + minItems: 1
>> > + maxItems: 8
>> > + items:
>> > + maxItems: 1
>> > + description: |
>> > + phandles to one or more reserved on-chip SRAM regions. Other than TCM,
>> > + the RPU can execute instructions and access data from, the OCM memory,
>> > + the main DDR memory, and other system memories.
>>
>> Drop the comma after "from"
>>
>>
>> > +
>> > + The regions should be defined as child nodes of the respective SRAM
>> > + node, and should be defined as per the generic bindings in,
>>
>> Drop the comma after "in"
>>
>>
>> > + Documentation/devicetree/bindings/sram/sram.yaml
>> > +
>> > + memory-region:
>> > + description: |
>> > + List of phandles to the reserved memory regions associated with the
>> > + remoteproc device. This is variable and describes the memories shared with
>> > + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
>> > + vrings, ...). This reserved memory region will be allocated on DDR memory.
>>
>> s/on DDR/in DDR/
>>
>> > + minItems: 1
>> > + maxItems: 8
>> > + items:
>> > + - description: region used for RPU firmware image section
>> > + - description: vdev buffer
>> > + - description: vring0
>> > + - description: vring1
>> > + additionalItems: true
>> > +
>> > + required:
>> > + - compatible
>> > + - power-domains
>> > +
>> > + unevaluatedProperties: false
>> > +
>> > +required:
>> > + - compatible
>> > +
>> > +additionalProperties: false
>> > +
>> > +examples:
>> > + - |
>> > + r5fss: r5fss {
>> > + compatible = "xlnx,zynqmp-r5fss";
>> > + xlnx,cluster-mode = <1>;
>> > +
>> > + r5f-0 {
>> > + compatible = "xlnx,zynqmp-r5f";
>> > + power-domains = <&zynqmp_firmware 0x7>;
>> > + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
>> > + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
>> > + mbox-names = "tx", "rx";
>> > + };
>> > +
>> > + r5f-1 {
>> > + compatible = "xlnx,zynqmp-r5f";
>> > + power-domains = <&zynqmp_firmware 0x8>;
>> > + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
>> > + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
>> > + mbox-names = "tx", "rx";
>> > + };
>> > + };
>> > +...
>> > diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
>> > index 0d9a412fd5e0..618024cbb20d 100644
>> > --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
>> > +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
>> > @@ -6,6 +6,12 @@
>> > #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
>> > #define _DT_BINDINGS_ZYNQMP_POWER_H
>>
>> > +#define PD_RPU_0 7
>> > +#define PD_RPU_1 8
>> > +#define PD_R5_0_ATCM 15
>> > +#define PD_R5_0_BTCM 16
>> > +#define PD_R5_1_ATCM 17
>> > +#define PD_R5_1_BTCM 18
>> > #define PD_USB_0 22
>> > #define PD_USB_1 23
>> > #define PD_TTC_0 24
>> > --
>>
>> > 2.25.1
>>
>>
>> --
>> Bye, Peter Korsgaard
>>
1 year, 10 months
- 1
- 0
[PATCH v8 0/6] Add Xilinx RPU subsystem support
by Tanmay Shah
This patch series adds bindings document for RPU subsystem found on Xilinx
ZynqMP platforms. It also adds device nodes and driver to enable RPU
subsystem in split mode and lockstep mode.
Xilinx ZynqMP platform contains Remote Processing Unit(RPU). RPU subsystem
contains two arm cortex r5f cores. RPU subsystem can be configured in
split mode, lockstep mode and single-cpu mode.
RPU subsystem also contains 4 Tightly Coupled Memory(TCM) banks.
In lockstep mode, all 4 banks are combined and total of 256KB memory is
made available to r5 core0. In split mode, both cores can access two
TCM banks i.e. 128 KB.
RPU can also fetch data and execute instructions from DDR memory along with
TCM memory.
---
Changes in v8:
- add 'items:' for sram property
Changes in v7:
- Add minItems in sram property
Changes in v6:
- Add maxItems to sram and memory-region property
Changes in v5:
- Add constraints of the possible values of xlnx,cluster-mode property
- fix description of power-domains property for r5 core
- Remove reg, address-cells and size-cells properties as it is not required
- Fix description of mboxes property
- Add description of each memory-region and remove old .txt binding link
reference in the description
- Remove optional reg property from r5fss node
- Move r5fss node out of axi node
Changes in v4:
- Add memory-region, mboxes and mbox-names properties in dt-bindings example
- Add reserved memory region node and use it in Xilinx dt RPU subsystem node
- Remove redundant header files
- use dev_err_probe() to report errors during probe
- Fix missing check on error code returned by zynqmp_r5_add_rproc_core()
- Fix memory leaks all over the driver when resource allocation fails for any core
- make cluster mode check only at one place
- remove redundant initialization of variable
- remove redundant use of of_node_put()
- Fix Comment format problem
- Assign offset of zynqmp_tcm_banks instead of duplicating it
- Add tcm and memory regions rproc carveouts during prepare instead of parse_fw
- Remove rproc_mem_entry object from r5_core
- Use put_device() and rproc_del() APIs to fix memory leaks
- Replace pr_* with dev_*. This was missed in v3, fix now.
- Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was reported by checkpatch script.
Changes in v3:
- Fix checkpatch script indentation warning
- Remove unused variable from xilinx remoteproc driver
- use C style comments, i.e /*...*/
- Remove redundant debug information which can be derived using /proc/device-tree
- Fix multiline comment format
- s/"final fot TCM"/"final for TCM"
- Function devm_kzalloc() does not return an code on error, just NULL.
Remove redundant error check for this function throughout the driver.
- Fix RPU mode configuration and add documentation accordingly
- Get rid of the indentations to match function documentation style with rest of the driver
- Fix memory leak by only using r5_rproc->priv and not replace it with new instance
- Use 'i' for the outer loop and 'j' for the inner one as per convention
- Remove redundant error and NULL checks throughout the driver
- Use devm_kcalloc() when more than one element is required
- Add memory-regions carveouts during driver probe instead of parse_fw call
This removes redundant copy of reserved_mem object in r5_core structure.
- Fix memory leak by using of_node_put()
- Fix indentation of tcm_mem_map function args
- Remove redundant init of variables
- Initialize tcm bank size variable for lockstep mode
- Replace u32 with phys_addr_t for variable stroing memory bank address
- Add documentation of TCM behavior in lockstep mode
- Use dev_get_drvdata instead of platform driver API
- Remove info level messages
- Fix checkpatch.pl warnings
- Add documentation for the Xilinx r5f platform to understand driver design
Changes in v2:
- Remove proprietary copyright footer from cover letter
Ben Levinsky (3):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
Tanmay Shah (3):
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
drivers: remoteproc: Add Xilinx r5 remoteproc driver
.../bindings/remoteproc/xlnx,r5f-rproc.yaml | 132 +++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 33 +
drivers/firmware/xilinx/zynqmp.c | 97 ++
drivers/remoteproc/Kconfig | 12 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/xlnx_r5_remoteproc.c | 1045 +++++++++++++++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
include/linux/firmware/xlnx-zynqmp.h | 60 +
8 files changed, 1386 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c
base-commit: 01a1a0c8d456b11f2f6b9b822414481beaa44d6f
--
2.25.1
1 year, 10 months
- 1
- 7
Re: [PATCH v6 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
by Tanmay Shah
On 6/2/22 8:14 AM, Rob Herring wrote:
> On Wed, Jun 01, 2022 at 12:05:09PM -0700, Tanmay Shah wrote:
>> Hi Rob,
>>
>> Thanks for reviews. Please find my comments below:
>>
>> On 6/1/22 11:42 AM, Rob Herring wrote:
>>> On Tue, May 31, 2022 at 04:43:05PM -0700, Tanmay Shah wrote:
>>>> Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
>>>> Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
>>>> (cluster).
>>>>
>>>> Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
>>>> ---
>>>>
>>>> Changes in v6:
>>>> - Add maxItems to sram and memory-region property
>>>>
>>>> Changes in v5:
>>>> - Add constraints of the possible values of xlnx,cluster-mode property
>>>> - fix description of power-domains property for r5 core
>>>> - Remove reg, address-cells and size-cells properties as it is not required
>>>> - Fix description of mboxes property
>>>> - Add description of each memory-region and remove old .txt binding link
>>>> reference in the description
>>>>
>>>> Changes in v4:
>>>> - Add memory-region, mboxes and mbox-names properties in example
>>>>
>>>> Changes in v3:
>>>> - None
>>>>
>>>>
>>>> .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 129 ++++++++++++++++++
>>>> include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
>>>> 2 files changed, 135 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>> new file mode 100644
>>>> index 000000000000..cbff1c201a89
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>> @@ -0,0 +1,129 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Xilinx R5F processor subsystem
>>>> +
>>>> +maintainers:
>>>> + - Ben Levinsky <ben.levinsky(a)xilinx.com>
>>>> + - Tanmay Shah <tanmay.shah(a)xilinx.com>
>>>> +
>>>> +description: |
>>>> + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
>>>> + real-time processing based on the Cortex-R5F processor core from ARM.
>>>> + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
>>>> + floating-point unit that implements the Arm VFPv3 instruction set.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: xlnx,zynqmp-r5fss
>>>> +
>>>> + xlnx,cluster-mode:
>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>> + enum: [0, 1, 2]
>>>> + description: |
>>>> + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
>>>> + lock-step mode(Both RPU cores execute the same code in lock-step,
>>>> + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
>>>> + core 1 runs normally). The processor does not support dynamic configuration.
>>>> + Switching between modes is only permitted immediately after a processor reset.
>>>> + If set to 1 then lockstep mode and if 0 then split mode.
>>>> + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
>>>> +
>>>> +patternProperties:
>>>> + "^r5f-[a-f0-9]+$":
>>>> + type: object
>>>> + description: |
>>>> + The RPU is located in the Low Power Domain of the Processor Subsystem.
>>>> + Each processor includes separate L1 instruction and data caches and
>>>> + tightly coupled memories (TCM). System memory is cacheable, but the TCM
>>>> + memory space is non-cacheable.
>>>> +
>>>> + Each RPU contains one 64KB memory and two 32KB memories that
>>>> + are accessed via the TCM A and B port interfaces, for a total of 128KB
>>>> + per processor. In lock-step mode, the processor has access to 256KB of
>>>> + TCM memory.
>>>> +
>>>> + properties:
>>>> + compatible:
>>>> + const: xlnx,zynqmp-r5f
>>>> +
>>>> + power-domains:
>>>> + description: RPU core PM domain specifier
>>>> + maxItems: 1
>>>> +
>>>> + mboxes:
>>>> + minItems: 1
>>>> + items:
>>>> + - description: mailbox channel to send data to RPU
>>>> + - description: mailbox channel to receive data from RPU
>>>> +
>>>> + mbox-names:
>>>> + minItems: 1
>>>> + items:
>>>> + - const: tx
>>>> + - const: rx
>>>> +
>>>> + sram:
>>>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>>>> + maxItems: 8
>>> minItems: 1
>>> maxItems: 8
>>> items:
>>> maxItems: 1
>> I have posted v7 which adds "minItems: 1".
>>
>> However, I didn't get items: part. Is it required to have items: now?
> Yes.
>> Can I add items: part once TCM bindings are posted?
> No.
>
>> I understand that minItems and maxItems under sram property decides how many
>> phandles sram can have.
>>
>> However, maxItems: 1 under items: field what it describes?
> 'phandle-array' is really a matrix type because we can have phandles
> plus argument cells. So you have to define each of the 1-8 entries is a
> single phandle cell (and no arg cells).
Thanks for explanation. I will send new revision as suggested.
>
> Rob
1 year, 10 months
- 1
- 0
Re: [PATCH v6 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
by Tanmay Shah
Hi Rob,
Thanks for reviews. Please find my comments below:
On 6/1/22 11:42 AM, Rob Herring wrote:
> On Tue, May 31, 2022 at 04:43:05PM -0700, Tanmay Shah wrote:
>> Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
>> Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
>> (cluster).
>>
>> Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
>> ---
>>
>> Changes in v6:
>> - Add maxItems to sram and memory-region property
>>
>> Changes in v5:
>> - Add constraints of the possible values of xlnx,cluster-mode property
>> - fix description of power-domains property for r5 core
>> - Remove reg, address-cells and size-cells properties as it is not required
>> - Fix description of mboxes property
>> - Add description of each memory-region and remove old .txt binding link
>> reference in the description
>>
>> Changes in v4:
>> - Add memory-region, mboxes and mbox-names properties in example
>>
>> Changes in v3:
>> - None
>>
>>
>> .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 129 ++++++++++++++++++
>> include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
>> 2 files changed, 135 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>> new file mode 100644
>> index 000000000000..cbff1c201a89
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>> @@ -0,0 +1,129 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Xilinx R5F processor subsystem
>> +
>> +maintainers:
>> + - Ben Levinsky <ben.levinsky(a)xilinx.com>
>> + - Tanmay Shah <tanmay.shah(a)xilinx.com>
>> +
>> +description: |
>> + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
>> + real-time processing based on the Cortex-R5F processor core from ARM.
>> + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
>> + floating-point unit that implements the Arm VFPv3 instruction set.
>> +
>> +properties:
>> + compatible:
>> + const: xlnx,zynqmp-r5fss
>> +
>> + xlnx,cluster-mode:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + enum: [0, 1, 2]
>> + description: |
>> + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
>> + lock-step mode(Both RPU cores execute the same code in lock-step,
>> + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
>> + core 1 runs normally). The processor does not support dynamic configuration.
>> + Switching between modes is only permitted immediately after a processor reset.
>> + If set to 1 then lockstep mode and if 0 then split mode.
>> + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
>> +
>> +patternProperties:
>> + "^r5f-[a-f0-9]+$":
>> + type: object
>> + description: |
>> + The RPU is located in the Low Power Domain of the Processor Subsystem.
>> + Each processor includes separate L1 instruction and data caches and
>> + tightly coupled memories (TCM). System memory is cacheable, but the TCM
>> + memory space is non-cacheable.
>> +
>> + Each RPU contains one 64KB memory and two 32KB memories that
>> + are accessed via the TCM A and B port interfaces, for a total of 128KB
>> + per processor. In lock-step mode, the processor has access to 256KB of
>> + TCM memory.
>> +
>> + properties:
>> + compatible:
>> + const: xlnx,zynqmp-r5f
>> +
>> + power-domains:
>> + description: RPU core PM domain specifier
>> + maxItems: 1
>> +
>> + mboxes:
>> + minItems: 1
>> + items:
>> + - description: mailbox channel to send data to RPU
>> + - description: mailbox channel to receive data from RPU
>> +
>> + mbox-names:
>> + minItems: 1
>> + items:
>> + - const: tx
>> + - const: rx
>> +
>> + sram:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + maxItems: 8
> minItems: 1
> maxItems: 8
> items:
> maxItems: 1
I have posted v7 which adds "minItems: 1".
However, I didn't get items: part. Is it required to have items: now?
Can I add items: part once TCM bindings are posted?
I understand that minItems and maxItems under sram property decides how
many phandles sram can have.
However, maxItems: 1 under items: field what it describes?
Thanks.
>
>> + description: |
>> + phandles to one or more reserved on-chip SRAM regions. Other than TCM,
>> + the RPU can execute instructions and access data from, the OCM memory,
>> + the main DDR memory, and other system memories.
>> +
>> + The regions should be defined as child nodes of the respective SRAM
>> + node, and should be defined as per the generic bindings in,
>> + Documentation/devicetree/bindings/sram/sram.yaml
>> +
>> + memory-region:
>> + description: |
>> + List of phandles to the reserved memory regions associated with the
>> + remoteproc device. This is variable and describes the memories shared with
>> + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
>> + vrings, ...). This reserved memory region will be allocated on DDR memory.
>> + minItems: 1
>> + maxItems: 8
>> + items:
>> + - description: region used for RPU firmware image section
>> + - description: vdev buffer
>> + - description: vring0
>> + - description: vring1
>> + additionalItems: true
>> +
>> + required:
>> + - compatible
>> + - power-domains
>> +
>> + unevaluatedProperties: false
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + r5fss: r5fss {
>> + compatible = "xlnx,zynqmp-r5fss";
>> + xlnx,cluster-mode = <1>;
>> +
>> + r5f-0 {
>> + compatible = "xlnx,zynqmp-r5f";
>> + power-domains = <&zynqmp_firmware 0x7>;
>> + memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
>> + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
>> + mbox-names = "tx", "rx";
>> + };
>> +
>> + r5f-1 {
>> + compatible = "xlnx,zynqmp-r5f";
>> + power-domains = <&zynqmp_firmware 0x8>;
>> + memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
>> + mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
>> + mbox-names = "tx", "rx";
>> + };
>> + };
>> +...
>> diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
>> index 0d9a412fd5e0..618024cbb20d 100644
>> --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
>> +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
>> @@ -6,6 +6,12 @@
>> #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
>> #define _DT_BINDINGS_ZYNQMP_POWER_H
>>
>> +#define PD_RPU_0 7
>> +#define PD_RPU_1 8
>> +#define PD_R5_0_ATCM 15
>> +#define PD_R5_0_BTCM 16
>> +#define PD_R5_1_ATCM 17
>> +#define PD_R5_1_BTCM 18
>> #define PD_USB_0 22
>> #define PD_USB_1 23
>> #define PD_TTC_0 24
>> --
>> 2.25.1
>>
>>
1 year, 10 months
- 1
- 0
[PATCH v7 0/6] Add Xilinx RPU subsystem support
by Tanmay Shah
This patch series adds bindings document for RPU subsystem found on Xilinx
ZynqMP platforms. It also adds device nodes and driver to enable RPU
subsystem in split mode and lockstep mode.
Xilinx ZynqMP platform contains Remote Processing Unit(RPU). RPU subsystem
contains two arm cortex r5f cores. RPU subsystem can be configured in
split mode, lockstep mode and single-cpu mode.
RPU subsystem also contains 4 Tightly Coupled Memory(TCM) banks.
In lockstep mode, all 4 banks are combined and total of 256KB memory is
made available to r5 core0. In split mode, both cores can access two
TCM banks i.e. 128 KB.
RPU can also fetch data and execute instructions from DDR memory along with
TCM memory.
---
Changes in v7:
- Add minItems in sram property
Changes in v6:
- Add maxItems to sram and memory-region property
Changes in v5:
- Add constraints of the possible values of xlnx,cluster-mode property
- fix description of power-domains property for r5 core
- Remove reg, address-cells and size-cells properties as it is not required
- Fix description of mboxes property
- Add description of each memory-region and remove old .txt binding link
reference in the description
- Remove optional reg property from r5fss node
- Move r5fss node out of axi node
Changes in v4:
- Add memory-region, mboxes and mbox-names properties in dt-bindings example
- Add reserved memory region node and use it in Xilinx dt RPU subsystem node
- Remove redundant header files
- use dev_err_probe() to report errors during probe
- Fix missing check on error code returned by zynqmp_r5_add_rproc_core()
- Fix memory leaks all over the driver when resource allocation fails for any core
- make cluster mode check only at one place
- remove redundant initialization of variable
- remove redundant use of of_node_put()
- Fix Comment format problem
- Assign offset of zynqmp_tcm_banks instead of duplicating it
- Add tcm and memory regions rproc carveouts during prepare instead of parse_fw
- Remove rproc_mem_entry object from r5_core
- Use put_device() and rproc_del() APIs to fix memory leaks
- Replace pr_* with dev_*. This was missed in v3, fix now.
- Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was reported by checkpatch script.
Changes in v3:
- Fix checkpatch script indentation warning
- Remove unused variable from xilinx remoteproc driver
- use C style comments, i.e /*...*/
- Remove redundant debug information which can be derived using /proc/device-tree
- Fix multiline comment format
- s/"final fot TCM"/"final for TCM"
- Function devm_kzalloc() does not return an code on error, just NULL.
Remove redundant error check for this function throughout the driver.
- Fix RPU mode configuration and add documentation accordingly
- Get rid of the indentations to match function documentation style with rest of the driver
- Fix memory leak by only using r5_rproc->priv and not replace it with new instance
- Use 'i' for the outer loop and 'j' for the inner one as per convention
- Remove redundant error and NULL checks throughout the driver
- Use devm_kcalloc() when more than one element is required
- Add memory-regions carveouts during driver probe instead of parse_fw call
This removes redundant copy of reserved_mem object in r5_core structure.
- Fix memory leak by using of_node_put()
- Fix indentation of tcm_mem_map function args
- Remove redundant init of variables
- Initialize tcm bank size variable for lockstep mode
- Replace u32 with phys_addr_t for variable stroing memory bank address
- Add documentation of TCM behavior in lockstep mode
- Use dev_get_drvdata instead of platform driver API
- Remove info level messages
- Fix checkpatch.pl warnings
- Add documentation for the Xilinx r5f platform to understand driver design
Changes in v2:
- Remove proprietary copyright footer from cover letter
Ben Levinsky (3):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
Tanmay Shah (3):
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
drivers: remoteproc: Add Xilinx r5 remoteproc driver
.../bindings/remoteproc/xlnx,r5f-rproc.yaml | 130 ++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 33 +
drivers/firmware/xilinx/zynqmp.c | 97 ++
drivers/remoteproc/Kconfig | 12 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/xlnx_r5_remoteproc.c | 1045 +++++++++++++++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
include/linux/firmware/xlnx-zynqmp.h | 60 +
8 files changed, 1384 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c
base-commit: 01a1a0c8d456b11f2f6b9b822414481beaa44d6f
--
2.25.1
1 year, 10 months
- 1
- 6
Re: [PATCH v6 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
by tanmay.shah＠xilinx.com
On 6/1/22 5:22 AM, Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> wrote:
> On 01/06/2022 01:43, Tanmay Shah wrote:
> > Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
> > Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
> > (cluster).
> >
> > Signed-off-by: Tanmay Shah <tanmay.shah(a)xilinx.com>
> > ---
> >
> > Changes in v6:
> > - Add maxItems to sram and memory-region property
> >
> > Changes in v5:
> > - Add constraints of the possible values of xlnx,cluster-mode property
> > - fix description of power-domains property for r5 core
> > - Remove reg, address-cells and size-cells properties as it is not required
> > - Fix description of mboxes property
> > - Add description of each memory-region and remove old .txt binding link
> > reference in the description
> >
> > Changes in v4:
> > - Add memory-region, mboxes and mbox-names properties in example
> >
> > Changes in v3:
> > - None
> >
> >
> > .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 129 ++++++++++++++++++
> > include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
> > 2 files changed, 135 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> > new file mode 100644
> > index 000000000000..cbff1c201a89
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> > @@ -0,0 +1,129 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx R5F processor subsystem
> > +
> > +maintainers:
> > + - Ben Levinsky <ben.levinsky(a)xilinx.com>
> > + - Tanmay Shah <tanmay.shah(a)xilinx.com>
> > +
> > +description: |
> > + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
> > + real-time processing based on the Cortex-R5F processor core from ARM.
> > + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
> > + floating-point unit that implements the Arm VFPv3 instruction set.
> > +
> > +properties:
> > + compatible:
> > + const: xlnx,zynqmp-r5fss
> > +
> > + xlnx,cluster-mode:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [0, 1, 2]
> > + description: |
> > + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
> > + lock-step mode(Both RPU cores execute the same code in lock-step,
> > + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
> > + core 1 runs normally). The processor does not support dynamic configuration.
> > + Switching between modes is only permitted immediately after a processor reset.
> > + If set to 1 then lockstep mode and if 0 then split mode.
> > + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
> > +
> > +patternProperties:
> > + "^r5f-[a-f0-9]+$":
> > + type: object
> > + description: |
> > + The RPU is located in the Low Power Domain of the Processor Subsystem.
> > + Each processor includes separate L1 instruction and data caches and
> > + tightly coupled memories (TCM). System memory is cacheable, but the TCM
> > + memory space is non-cacheable.
> > +
> > + Each RPU contains one 64KB memory and two 32KB memories that
> > + are accessed via the TCM A and B port interfaces, for a total of 128KB
> > + per processor. In lock-step mode, the processor has access to 256KB of
> > + TCM memory.
> > +
> > + properties:
> > + compatible:
> > + const: xlnx,zynqmp-r5f
> > +
> > + power-domains:
> > + description: RPU core PM domain specifier
> > + maxItems: 1
> > +
> > + mboxes:
> > + minItems: 1
> > + items:
> > + - description: mailbox channel to send data to RPU
> > + - description: mailbox channel to receive data from RPU
> > +
> > + mbox-names:
> > + minItems: 1
> > + items:
> > + - const: tx
> > + - const: rx
> > +
> > + sram:
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + maxItems: 8
>
> Without minItems, this means maxItems=minItems and previously you had
> here "minItems:1", so is it really what you want?
>
Ok. I misunderstood previous comment here in that case. I thought minIterms will be
1 by default. But, it is not that way. I will fix this in next revision.
Thanks.
> Anyway rest looks good to me.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>
>
> Best regards,
> Krzysztof
>
1 year, 10 months
- 1
- 0